Bedienungsanleitung Yamaha MOTIF XS8 (Seite 263 von 320) (Englisch)

586888

263

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

System Settings (Utility mode, etc.)

MOTIF XS Owner’s Manual 263

Voice mode

Song mode

Pattern mode

Mixing mode

Master mode

Utility mode

File mode Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

3[SF5] Select

Pressing this button calls up the Select Auto Load File

display. From this display you can specify the ﬁle (in the

external storage device) to be loaded automatically when

turning the power on (when Auto Load is set to on).

From this display you can specify the ﬁle (in the external

storage device) to be loaded automatically when turning the

power on (when Auto Load is set to on).

Move the cursor to

the desired ﬁle then press the [ENTER] button to determine

the Auto Load File.

Parameters 1 – 4 are the same as the ones in the File

window (page 275) of the File mode.

Audio In/Out Settings—[F2] I/O

(Input/Output)

From this display you can set Audio In/Out parameters.

1Mic/Line

When using the A/D INPUT jacks, this determines the input

source, microphone (mic) or line.

Settings: mic, line

mic

Intended for low output equipment, such as a microphone, electric

guitar or bass.

line

Intended for high output equipment, such as a keyboard, synthesizer,

or CD player.

2L&R Gain

Determines the output gain of the OUTPUT L/MONO and R

jacks.

Settings: 0dB, +6dB

3Assign L&R Gain

Determines the output gain of the ASSIGNABLE OUTPUT L

and R jacks.

Settings: 0dB, +6dB

4 – ) mLAN Gain

Determines the output gain of the mLAN connector.

Settings: 0dB, +6dB

!mLAN Monitor Setup

Determines the audio signal ﬂow for monitoring the sound

when using the MOTIF XS with DAW software installed on a

computer connected to the MOTIF XS via an IEEE1394

cable.

nYou will need to properly set up the DAW software in addition

to making the settings here. For details, see page 47.

Settings: stand alone, with PC, with PC (DirectMonitor)

stand alone

This should be selected when you are using the MOTIF XS alone or are

not using the DAW software even with a computer connected to the

MOTIF XS via an IEEE1394 cable. When this is selected, the audio

signal of the MOTIF XS will be output directly via the OUTPUT L/MONO

and R jacks normally.

with PC

This should be selected when you are using the MOTIF XS as an audio

device with the DAW software. When this is selected, the audio signal

of the MOTIF XS will be output to the DAW software on a computer via

an IEEE1394 cable, merged and mixed with the DAW sound, returned

back to the MOTIF XS, then output via the OUTPUT L/MONO and R

jacks. Selecting this allows you to apply VST Effects within the DAW

software to the MOTIF XS sound.

with PC (DirectMonitor)

This should be selected when recording your keyboard performance to

the DAW software on the computer. The audio signal of the MOTIF XS

will be output directly via the OUTPUT L/MONO and R jacks with the

audio signal sent from the DAW software via an IEEE1394 cable. Keep

in mind that the Rec Monitor of the DAW software should be set to “off”

in order to prevent “double” sound from occurring.

nWhen “with PC” is selected, there may be a short delay

between when you play the keyboard and when you hear the

resulting sound.

nSet this parameter to “stand alone” when the MOTIF XS is not

connected to an external device via an IEEE1394 cable.

System Settings for the Voice

mode—[F3] Voice

From the following displays, you can set parameters

related to the Master Effect, Master EQ, Audio Input part,

Controller, and Micro Tuning in the Voice mode. These

settings will be applied to all Voices. The following displays

are available only when entering the Utility mode from the

Voice mode.

Specifying the Auto Load File

[SF4] ➞ [SF5] Select

Upper Level

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS8 Seite 263

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info