Bedienungsanleitung Yamaha MOTIF XS8 (Seite 261 von 320) (Englisch)

586888

261

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

System Settings (Utility mode, etc.)

MOTIF XS Owner’s Manual 261

Voice mode

Song mode

Pattern mode

Mixing mode

Master mode

Utility mode

File mode Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

2Description

Here, you can input a short summary or memo about your

MOTIF XS. The description input here can be browsed

from the other computer connected to the network. This is

useful when several MOTIF XSs are connected to the same

network. In general, the default Description will sufﬁce, so

there should be no need to change this. For detailed

instructions on inputting a character, see page 82.

3DHCP Client

Determines whether or not the MOTIF XS is handled as the

client device of the DHCP server. When this is set to “on,”

the MOTIF XS is handled as a client device of the DHCP

server. The DHCP (Dynamic Host Conﬁguration Protocol) is

a standard or protocol by which IP addresses and other

low-level network conﬁguration information can be

dynamically and automatically assigned each time your

MOTIF XS is connected to the network. If the DHCP server

covers the network, set this parameter to “on.” If you wish

to set a speciﬁc IP address or there is no DHCP server, set

this parameter to “off.”

Settings: on, off

4File Server

Determines whether the File Server function of the MOTIF

XS is active or not. When this parameter is set to “on,” the

another computer on the same network can access ﬁles on

the USB storage device connected to the USB TO DEVICE

connector of the MOTIF XS.

Settings: on, off

nMake sure to set the Password (%) of this instrument before

setting this parameter to “on.” If this is set to “on” before the

Password is set, “Password is unspeciﬁed” appears.

5IP Address

Determines the IP Address, a string of numbers assigned

to each computer or your MOTIF XS connected to a

network, indicating the device’s location on the network.

When the MOTIF XS is connected to the network which the

DHCP server covers and the DHCP Client parameter

above is set to “on,” this parameter is automatically set,

and you will not need to input it manually. When the DHCP

Client (3) is set to “off” and you do not know how to set this

parameter, consult your network administrator or Internet

provider.

Settings: 0 – 255

6Subnet Mask

Indicates the Subnet Mask, a setting used to divide a

large-scale network into several smaller networks. When

the MOTIF XS is connected to the network which the DHCP

server covers and the DHCP Client parameter above is set

to “on,” this parameter is automatically set resulting that

you need not input here. When the DHCP Client (3) is set

to “off” and you do not know how to set this parameter,

consult your network administrator or Internet provider.

Settings: 0 – 255

7Gateway

Determines the Gateway, a system which links different

networks or systems, and makes possible data transfer

and conversion despite differing communications

standards. When the MOTIF XS is connected to the

network which the DHCP server covers and the DHCP

Client parameter above is set to “on,” this parameter is

automatically set, and you will not need to input it manually.

Settings: 0 – 255

8DNS1 (Domain Name Server1)

9DNS2 (Domain Name Server2)

Determines the address for the Domain Name server. Up to

two servers (primary DNS1 and secondary DNS2) can be

set. When you do not use the Domain Name server, set

both of the DNS1 and DNS2 to “0.0.0.0.” When you use

only the DNS1, set the DNS2 to “0.0.0.0.” When the MOTIF

XS is connected to the network which the DHCP server

covers and the DHCP Client parameter above is set to

“on,” this parameter is automatically set, and you will not

need to input it manually.

Settings: 0 – 255

)Security

Determines the certiﬁcation type when another computer

on the network accesses the MOTIF XS. If you wish to

certiﬁcate the computer by using the Account ($) and

password, set this parameter to “workgroup.” If you wish to

certiﬁcate the computer by using the domain controller on

the network, set this parameter to “domain.”

Settings: domain, workgroup

!Domain

Enters the Domain name or Workgroup name. Input the

Domain name or Workgroup name to the same name as

that of the online device you wish to use for accessing the

MOTIF XS. For detailed instructions on inputting

characters, see page 82.

@WINS

Determines the address for the WINS (Windows Internet

Name Service) server. When the PDC Name (#) is set to

the Host name (NetBIOS name), you will set the address of

the WINS server. If you are not using the WINS server, set

this parameter to “0.0.0.0.”

Settings: 0 – 255

#PDC Name (Primary Domain Controller Name)

Determines the Host name (NetBIOS name) of the Domain

Controller or IP address on the network. When the Security

()) is set to “domain,” the certiﬁcation will be executed by

using the Domain Controller set here.

$File Server Account

Determines the account name (user name) used when

another computer on the network accesses the MOTIF XS.

For detailed instructions on inputting characters, see

page 82.

nThe account is not set by default. When no account is set, the

MOTIF XS can be accessed by the account named “nobody.”

Yamaha MOTIF XS8 Seite 261

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info