Bedienungsanleitung Yamaha MOTIF XS8 (Seite 259 von 320) (Englisch)

586888

259

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Voice mode

Song mode

Pattern mode

Mixing mode

Master mode

Utility mode

File mode Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

MOTIF XS Owner’s Manual 259

System Settings (Utility mode, etc.)

In the Utility mode, you can set parameters that apply to the entire system of the MOTIF XS. To enter the Utility mode, press

the [UTILITY] button. Pressing the [EXIT] button returns to the original display. For system settings related to the sequencer

in Song/Pattern/Arpeggio playback, call up the Sequencer Setup display by pressing the [SEQ SETUP] button in the Song/

Pattern/Performance mode.

Basic Procedure in the Utility mode

1Enter the Utility mode.

Press the [UTILITY] button to enter the Utility mode.

(The indicator lights.)

2Calls up the desired display.

Note the tab menus of the [F1] – [F6] and [SF1] – [SF5]

buttons to ﬁnd the desired function, then press the

relevant button to call up the desired display.

3Set the desired parameter.

Move the cursor to each parameter, then set the value

by using the data dial, [INC/YES] and [DEC/NO] button.

When “Press [ENTER] to set” is shown on the display, make

sure to press the [ENTER] button before going to the next

step. If you do not, the settings will not be stored, even if you

press the [STORE] button in the next step.

4Press the [STORE] button to store the Utility

setting and Sequencer Setup to internal

memory.

All Utility settings will be lost when the power is turned off

without storing.

nThe parameter settings in the Utility displays and

Sequencer Setup displays are treated and stored as a

single unit. This means that when you execute the Store

operation in the Utility mode, the settings in the Sequencer

Setup displays are also stored, and vice versa.

5Press the [EXIT] button to exit from the Utility

mode to the original mode.

System Information—[SF6] INFO

This display indicates the MIDI IN/OUT settings and

Network settings. This display cannot be edited.

1MIDI IN/OUT (Indication only)

Indicates the hardware terminal via which the MIDI data is

input or output. The related parameters can be set in the

MIDI display (page 268).

2Network Information

Indicates the network settings. The related parameters can

be set in the Network display (page 260).

General Settings—[F1] General

Tone Generator

From this section, you can make overall settings for the

internal tone generator. The settings here only affect the

internal tone generator block. The MIDI output will not be

affected.

1Volume

Determines the overall volume of the instrument.

Settings: 0 – 127

2Note Shift

Determines the amount (in semitones) by which the pitch of

all notes is shifted.

Settings: -24 semi – +0 semi – +24 semi

3Tune

Determines the ﬁne tuning of the overall sound. You can

adjust the tuning in cent increments.

Settings: -102.4 cents – +0 cents – +102.3 cents

CAUTION

Tone Generator and Keyboard settings

—[SF1] Play

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS8 Seite 259

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info