Bedienungsanleitung Yamaha MOTIF XS8 (Seite 258 von 320) (Englisch)

586888

258

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode

Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

Using as a Master Keyboard (Master mode)

MOTIF XS Owner’s Manual

258

This function lets you reset (initialize) all Master parameters

to their default settings. It also allows you to selectively

initialize certain parameters, such as Common settings and

Zone settings.

1All Parameters

Determines whether or not all settings for the selected

Master are initialized. When set to “on,” other parameters in

this display cannot be set.

Settings: B (on), A (off)

2Common

Determines whether or not all Common parameter settings

for the selected Master are initialized. When set to “on,”

ZONE cannot be set.

Settings: B (on), A (off)

3Zone

Determines whether or not all Zone parameter settings for

the selected Master are initialized. When set to “on,”

executing the Job initializes all the parameter settings of

Common Edit.

Settings: B (on), A (off)

4Initialize Type

Determines how the Zone parameter settings for the

selected Master are initialized. Three methods of Initializing

are available.

Settings: split, zone, layer

split

Sets the Zone 1 and Zone 2 to on, then splits the keyboard range using

Zone 1 and Zone 2. “Upper Ch” determines the MIDI transmit channel

of the upper range of the keyboard, “Lower Ch” determines the MIDI

transmit channel of the lower range of the keyboard, and “Split Point”

determines the note (C -2 – G8) number which separates the upper

range and lower range of the keyboard.

zone

Sets Zones 1 – 4 to on, Zones 5 – 8 to off, and the MIDI Transmit

Channels to 1 – 8 respectively.

layer

Sets the Zone 1 and Zone 2 to on, then lets you layer two Parts. “Upper

Ch” and “Lower Ch” determine the MIDI transmit channels of the two

Zones respectively.

5Upper Ch (Upper Channel)

6Lower Ch (Lower Channel)

Determines the MIDI transmit channels of Zone 1 and Zone

2 respectively when the Initialize Type is set to “layer” or

“split.”

Settings: 1 – 16

7Split Point

Determines the Split Point that divides the keyboard into

the Zone 1 and Zone 2 when the Initialize Type is set to

“split.” By setting this parameter, the Note Limit High of

Zone 1 is automatically set to the note one semitone lower

than the Split Point set here and the Note Limit Low of Zone

2 is automatically set to the note same as the Split Point set

here.

Settings: C -2 – G8

nThe Note Limit High and Note Limit Low parameters can be

set in the Note display (page 255) of the Zone Edit.

This function lets you send all your edited parameter

settings for the currently selected Master to a computer or

another MIDI device for data archiving. Press the [ENTER]

button to execute the Bulk Dump.

nThe Bulk Dump data includes only the MIDI messages and

does not include the Waveforms.

nIn order to execute Bulk Dump, you will need to set the correct

MIDI Device Number. For details, see page 268.

Initializing the Master—[F1] Init

Transmitting the Master Settings to an

external MIDI device (Bulk Dump)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS8 Seite 258

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info