Bedienungsanleitung Yamaha MOTIF XS8 (Seite 260 von 320) (Englisch)

586888

260

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode

Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

System Settings (Utility mode, etc.)

MOTIF XS Owner’s Manual

260

4Sustain Pedal

Determines which model of an optional Foot Controller

connected to the FOOT SWITCH SUSTAIN jack is recognized.

When you connect an optional FC3 (equipped with the half-

damper feature) for producing a “half-damper” effect (as on a

real acoustic piano), set this parameter to “FC3 (half on)” and

set the Half Damper Switch parameter to “on” in the

Amplitude EG display (page 123) of Voice Element Edit. If you

don’t need or want to disable the half-damper feature and still

use an FC3, set this parameter to “FC3 (half off).” When you

connect an optional FC4 or FC5 (which is not equipped with

the half-damper feature), set this parameter to “FC4” or “FC5.”

Settings: FC3 (half on), FC3 (half off), FC4/5

nNote that this setting is not necessary when controlling the

half-damper feature via Control Change messages from an

external MIDI device to the instrument.

Keyboard

From this section, you can set the keyboard-related

parameters. The settings here affect the MIDI messages

generated by playing the keyboard.

5Octave

Determines the amount in octaves by which the range of

the keyboard is shifted up or down. This setting can be

changed also by pressing any of the OCTAVE buttons.

Settings: -3 – +0 – +3

6Transpose

Determines the amount in semitones by which the range of

the keyboard is shifted up or down.

Settings: -11 semi – +0 semi – +11 semi

nIf you transpose beyond the note range limits (C -2 and G8),

notes in the adjacent octaves will be used.

7Velocity Curve

The ﬁve curves determine how the actual velocity will be

generated and transmitted according to the velocity

(strength) with which you play notes on the keyboard. The

graph shown in the display indicates the velocity response

curve. (The horizontal line represents the received velocity

values (strength of your playing), while the vertical line

represents the actual velocity values transmitted to the

internal/external tone generators.)

Settings: normal, soft, hard, wide, ﬁxed

normal

This linear “curve” produces one-to-one correspondence between the

strength of your keyboard playing (velocity) and the actual sound change.

soft

This curve provides increased response, especially for lower velocities.

hard

This curve effectively lessens the overall response compared to the

“norm” curve.

wide

This setting provides opposite response curves for lower and higher

velocities. It widens the apparent dynamic range of the controller,

producing less sound change in the softer range and more change in the

higher range.

ﬁxed

This setting produces the same amount of sound change (set in Fixed

Velocity below), no matter what your playing strength.

8Fixed Velocity

This parameter is available only when you select the “ﬁxed”

Velocity Curve above. The velocity of the note you play is

ﬁxed at the value set here.

Settings: 1 – 127

From this display you can select the speciﬁc effect(s) to be

bypassed when the EFFECT BYPASS [SYSTEM] button is

turned on. The bypassed effect is then temporarily

disabled.

1Reverb

When this is set to on and the [SYSTEM] button is turned

on, the Reverb effect is bypassed.

2Chorus

When this is set to on and the [SYSTEM] button is turned

on, the Chorus effect is bypassed.

From this display, you can set parameters for connecting

the MOTIF XS to the network system via the ETHERNET

connector. Make sure to press the [ENTER] button after

setting in this display. If you do not, the settings will not be

stored, even if you press the [STORE] button.

1Host Name

Determines the Host Name (NetBIOS name) of the MOTIF

XS. This is used when accessing the MOTIF XS from a

computer connected to the network. Set a unique Host

Name that will not conﬂict with any other computer. In

general, the default Host Name will sufﬁce, so there should

be no need to change this. For detailed instructions on

naming, see page 82.

System Effect Bypass Settings—[SF2]

FXBypass

Network Settings—[SF3] Network

)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS8 Seite 260

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info