Bedienungsanleitung Yamaha MOTIF8 (Seite 48 von 300) (Englisch)

571289

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

MOTIF Basic Structure

Main functions

Basic Structure

Controllers

The MOTIF gives you an amazing amount of control

options. Not only is it equipped with the conventional

Pitch Bend and Modulation Wheels, it also features

special knobs and sliders — and has an additional set

of rear-panel jacks for connecting foot controllers and

footswitches. You can connect controllers to the rear

panel jacks to control various parameters by foot as

well as by hand.

This section explains the basic functions of each

controller.

Pitch Bend Wheel

This wheel’s prime function is to control pitch.

Move the wheel up or down to bend the pitch up or

down.

n Pitch Bend Range can be set for each Voice (page 132).

The wheel can also be assigned other parameters

(page 134).

n Even if a different parameter is assigned to the wheel,

Pitch Bend messages are still transmitted through MIDI

OUT when it is being used.

Modulation Wheel

The more you move this wheel up, the greater the

modulation that is applied to the sound.

n Modulation depth can also be set beforehand. Also, the

wheel can be assigned to different parameters, such as

volume or pan (page 134).

Knobs

These knobs let you change various aspects of the

Voice’s sound in real time — while you play. Turn a

knob to the right to increase the value, and left to

decrease it. You can change which particular group of

functions or parameters the knobs are assigned to by

pressing the [KNOB CONTROL FUNCTION] button.

Selecting the ASSIGN group (A, B, 1, 2) lets you

control a group of user-assignable functions.

n Common system parameters are assigned to Knobs [A]

and [B] (page 256). Voice-speciﬁc parameters are

assigned to Knobs [1] and [2] (page 132). Knobs [1] and

[2] can be assigned to Control Set Source.

n A preset of suitable parameter settings is assigned to each

Voice. By using each knobs [1] and [2], you are in effect

adjusting these settings by a certain amount. If these

parameters are already preset at their minimum or

maximum settings, the settings cannot be exceeded.

Control Sliders (CS)

In the Voice mode, these are used to control the volume

of each of the four Elements. In the Performance

mode, these are used to control the volume of the

four parts. In the Song/Pattern mode, these let you

adjust the volume of speciﬁc tracks,(parts)

depending on which group of tracks is currently

selected.

When the Zone Switch is set to on in the Master Play

mode, various functions (Control Number) can be

assigned to these Control Sliders (page 273).

Pitch Bend

Wheel

Modulation

Wheel

Pitch Up

Pitch Down

Pitch Bend

Wheel

Modulation

Wheel

Deeper

KNOB

CONTROL

FUNCTION

PA N

REVERB

CHORUS

TEMPO

AT TACK RELEASECUTOFF

RESONANCE

ASSIGN A ASSIGN B ASSIGN 1 ASSIGN 2

MEQ LOW

MEQ HI MIDMEQLOWMID MEQ HIGH

KN 1 KN 2 KN 3 KN 4

When the selected

tracks (parts) are 1-4:

12 3 4

When the selected

tracks (parts) are 5-8:

5678

When the selected

tracks (parts) are 9-12:

9101112

When the selected

tracks (parts) are 13-16:

13 14 15 16

VOLUME 1 VOLUME 2 VOLUME 3 VOLUME 4

CS 1 CS 2 CS 3 CS 4

ZONE 1 ZONE 2 ZONE 3 ZONE 4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF8 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info