Bedienungsanleitung Yamaha MOTIF8 (Seite 50 von 300) (Englisch)

571289

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

MOTIF Basic Structure

Main functions

Basic Structure

■ Using several sources to control one

destination

Continuing from the example above, now create

another Control Set where Src is set to FC (Foot

Controller) and Dest is set to ELFO-PM (Element LFO

Pitch Modulation Depth). Again, specify the Element

to be controlled and also the depth of control.

Now, Pitch Modulation is assigned to both the

Modulation Wheel and Foot Controller. In other

words, you can also assign several Src controllers to

each Dest parameter.

By assigning all six Control Sets, you will have a

stunning degree of real-time control over the

synthesizer’s sounds.

■ Control Sets and External MIDI Control

In a Control Set, the controllers are assigned to the

internal parameters of the synthesizer. However, some

controllers were originally designed for a particular

purpose, and send pre-deﬁned MIDI Control Change

messages when used, regardless of their Control Set

allocations within the synthesizer.

For example, the Pitch Bend Wheel, Modulation Wheel

and keyboard aftertouch were originally designed to

control pitch bend, modulation and aftertouch.

Therefore, when you use these controllers, pitch bend,

modulation and aftertouch information is always sent

to the MIDI Out.

Let’s say the Pan parameter is assigned to the Pitch

Bend Wheel in a Control Set. Now, when you move the

Pitch Bend Wheel, the internal tone generator of the

synthesizer will pan the sound; however, at the same

time, the original pre-deﬁned Pitch Bend messages will

still be sent to the MIDI Out.

The controllers can also send MIDI Control Change

messages to control the parameters of external MIDI

devices. These assignments can be set in the Utility

Mode.

n Since Pitch Bend Wheel, Modulation Wheel and

keyboard aftertouch are pre-deﬁned with speciﬁc MIDI

controls, other MIDI Control Change numbers cannot be

assigned to them.

You can also set up a controller such that it sends one

kind of Control message to the synthesizer’s internal

tone generator yet another kind to the MIDI Out.

For example, in a Control Set you could assign

resonance to Assignable Knob [1]. Then, in the Utility

Mode, you could assign Control Change Number 1

(Modulation) to the same knob. Now, when you turn

the knob, resonance will be applied to the sound of the

internal tone generator; however, at the same time,

modulation information will be sent to the external

MIDI device connected to the MIDI Out.

ELFO-PM

Dest

ELM PAN

Dest

SET 1 SET 2

Src

(Modulation Wheel)

Src

(Modulation Wheel)

Moving the

Modulation Wheel

changes both the

amount of Pitch

Modulation and the

pan position.

ELFO-PM

Dest

ELFO-PM

Dest

SET 1 SET 3

Src

(Modulation Wheel)

Src

(Foot Controller)

You can control the

pitch modulation effect

using either of

Modulation Wheel

(MW) and Foot

Controller (FC).

OUT

Tone Generator

Pitch LFO1 PAN

MIDI

MIDI Control

Pitch Bend

Wheel

Controller Set

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF8 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info