Bedienungsanleitung Yamaha MOTIF8 (Seite 241 von 300) (Englisch)

571289

241

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

241

MOTIF Reference

Sampling Job mode

Reference Sampling mode

3 Press the [SF2] button to call up the Samples

assigned to the selected Key Bank in order.

n Step #3 above as well as the Audition function can

be used with any of the displays called up via the

[F2] - [F4] buttons.

Sample Edit

The explanations here apply to step #5 of the Basic

Procedure on page 59.

● [F2] Sample Edit Trim

This operation is the same as in the Sampling

Record mode (when Sampling Type is set to

“slice+seq”). See page 237.

● [F3] Sample Edit Parameter

• Level

Determines the output level of the selected sample.

❏ Settings -94.5dB~0dB

• Pan

Determines the stereo position of the selected sample.

❏ Settings L63 (far left) ~ C (center) ~ R63 (far right)

• PlayMode

Determines how the selected sample is to be played back.

❏ Settings

forw

ard

The Sample playback begins from the Start point to the

End point.

everse

The Sample playback begins from the End point to the

Start point in reverse.

loop

The Sample playback begins from the Start point, moves to

the Loop point and then repeats continuously from the

Loop point to the End point.

n For details about these settings above, see page 61.

• Original Key

Determines the base key for the sample. Since the sample

will be pitched shifted for keys played around this base

key, this should be set as close as possible to the original

pitch or note value of the actual sample.

❏ Settings C - 2 ~ G8

• Fine Tune

Determines the ﬁne tuning for the pitch of the sample.

❏ Settings -100 ~99 cents

● [F4] Sample Edit Range

From this display you can set the Key Range and the

Velocity Range for the sample assigned to the

selected Key Bank. Note that both the Key range

and Velocity range values are graphically indicated

in the display.

n When the cursor is at one of the Key Range values,

you can directly set the Key Range parameter from

the keyboard. (Simultaneously hold down the

[INFORMATION] button and press the

appropriate key on the keyboard.)

Sampling Job mode

The Sampling Job mode contains a comprehensive set

of editing tools and functions you can use to change the

sound of the sample you’ve created and edited in the

Sampling Edit mode. It also includes a variety of

convenient operations, such as copying or erasing data.

◆ Basic Procedure

1 Press the [INTEGRATED SAMPLING] button to

enter the Sampling mode. (The indicator lights.)

n Unlike in the Sampling Record mode, all

parameters and functions of the Sampling Job

mode are the same, no matter which mode was

previously selected. The only exception to this is

the Slice Job ([F1]-12 below), which varies

depending on whether the previously selected

mode was Voice/Performance or Song/Pattern.

n All Sampling Job operations apply to the Waveform

(actual sample), not the voice.

2 Press the [JOB] button to enter the Sampling Job

mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF8 Seite 241

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info