Bedienungsanleitung Yamaha MOTIF8 (Seite 239 von 300) (Englisch)

571289

239

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

239

MOTIF Reference

Sampling Record mode

Reference Sampling mode

• SubDivide

The Meter parameter sets the basic slice unit, and

SubDivide speciﬁes even ﬁner resolution for phrases

containing regions with shorter notes.

For the following phrase, for example, the Meter should be

set to 4/4 and SubDivide to 1/2.

❏ Settings

When Meter is set to 1 ~ 8/4:

quarter note (1/1), 8th note (1/2), 4th note triplet (1/3),

16th note (1/4), 8th note triplet (1/6), 16th note 1/8),

32nd note triplet (1/12)

When Meter is set to 1 ~ 16/8:

8th note (1/1), 16th note (1/2), 8th note triplet (1/3),

32nd note 1/4), 16th note triplet (1/6)

When Meter is set to 1 ~ 16/16:

16th note (1/1), 32nd note 1/2), 16th note triplet (1/3)

n This parameter has no effect when the Slice Type

parameter is set to beat 1~2.

n The maximum slice resolution for stereo samples

is 64 slices, and for mono samples 128 slices.

• Sens (Envelope Sensitivity)

Further adjusts the sub-divisions speciﬁed by the

SubDivide parameter. Higher values result in higher

resolution, allowing even ﬁner notes and smaller sounds to

be detected and sliced.

Use the Audition function (press [SF1]) to hear the

results, and if you’re not satisﬁed with them, change the

setting and try again.

❏ Settings 1~5

n This parameter has no effect when the “quick”

slice type is selected.

◆ Tips for using the Slice Types

● Slicing percussive phrases having short decays

• First, try slicing using “beat1.”

• If the result has a weak attack or the release portions

of the phrase seem to overlap, try again using “beat2.”

Try adjusting the envelope sensitivity for ﬁner

control.

• If after using “beat1” the attack portions overlap or

the overall rhythmic feel is degraded, try again using

“beat3.” Use the SubDivide parameter to adust the

slice resolution, and make ﬁnal adjustments with the

Envelope Sensitivity parameter.

● Slicing phrases having long decays

• First, try slicing using “phrase1.”

• If the result has a weak attack or the release portions

of the phrase seem to overlap, try again using

“phrase2.” Use the SubDivide parameter to adust the

slice resolution, and make ﬁnal adjustments with the

Envelope Sensitivity parameter.

• If after using “phrase1” the points between the slices

sounds rough and the overall feel is choppy, try again

using “phrase3” and set SubDivide to a ﬁner

resolution. Make ﬁnal adjustments with the

Envelope Sensitivity parameter. The “phrase3”

setting is generally best for sustained strings or brass

type sounds with no vibrato — in other words, the

pitch remains constant. It can also produce echo-like

effects when applied to percussive phrases with short

decay.

• If after using “phrase1” the points between the slices

sounds rough and the overall feel is choppy, try again

using “phrase4” and set SubDivide to a ﬁner

resolution. Make ﬁnal adjustments with the

Envelope Sensitivity parameter. The “phrase4”

setting is generally best for sustained strings or brass

type sounds with vibrato, as well as vocal phrases.

◆ Wave Memory Required for Slice

Operations

Individual wave data slices created through slice

operations require approximately 1.5 times the original

memory because a tail section is automatically added

and fade-in and fade-out sections are automatically

created at the beginning and end of the wave data. This

helps to maintain maximum sound quality when the

BPM is increased, and results in smoother connections

between slices (no tail section is created when the

QUICK slice type is selected).

A memory work area is required for the synthesis

calculations carried out for each slice operation, as well

as sufﬁcient memory to hold the completed waveforms.

When the sampling frequency is 44.1 kHz, the

approximate amount of memory (expressed in

kilobytes) required for each slice type is listed below.

Original

waveform

Sliced

waveform

Tail section

Fade section

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF8 Seite 239

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info