Bedienungsanleitung Yamaha MOTIF8 (Seite 264 von 300) (Englisch)

571289

264

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

264

MOTIF Reference

File mode

Reference File mode

• Wav Extension: .WAV

A WAV ﬁle (Windows audio format) can be loaded to the

MOTIF and can be used as a User Wave.

• Aif (AIFF ﬁle) Extension: .AIF

An AIFF ﬁle (Macintosh audio format) can be loaded to

the MOTIF and can be used as a User Wave.

n In addition to the ﬁle types above, Yamaha A5000/

A4000/A3000/SU700 ﬁles and AKAI S1000/

S3000 ﬁles can be loaded to the MOTIF.

■ File types that can be loaded from the

Memory Card/SCSI storage device to the

MOTIF when turning the power on (Auto

Load ﬁle)

Among the ﬁle types described on page 262, “All”,

“Plugin All Bulk 1”, “Plugin All Bulk 2” and

“Plugin All Bulk 3” can be loaded from the Memory

card/SCSI storage device to the MOTIF's User

Memory automatically when turning the power on.

1 Name the ﬁles you wish to have load automatically

when the power is turned on as described below,

and save them together in a single folder.

n After you’ve ﬁnished naming the appropriate ﬁles,

keep the corresponding folder selected in the

display and go to step #2.

2 Press the [UTILITY] button to enter the Utility

mode.

3 Press the [F1] button, then press the [SF4] button

to show the Auto Load ﬁle display.

4 Set “Auto Load” to on, and press the [SF5] button.

5 Turn the power off.

6 Before turning the power on next time, make sure

that the appropriate data is available to the

MOTIF. In other words, make sure memory card

speciﬁed in step #1 is properly inserted, or that the

SCSI device speciﬁed in step #1 is properly

connected.

7 Turn the power on. The MOTIF searches the

device and speciﬁed folder for the auto-load ﬁles

(the ﬁles you named and saved in step #1), and

automatically loads them to User memory.

n Any ﬁles in the device and folder registered in step

#4 that do not have appropriate auto-load names

are ignored.

■ File names

Files are named according to the MS-DOS naming

convention. If the ﬁle name contains spaces and other

characters unrecognized in MS-DOS, these characters

will automatically be replaced by “_” (underscore)

characters when saving.

For speciﬁc instructions on naming ﬁles, see page 267.

[F1] Conﬁguration

The explanations here apply to step #2 of the Basic

Procedure on page 262.

● [F1]-[SF1] CONFIG Currently recognized

device

• Current

In this display you can select the device to be recognized by

the MOTIF — a memory card inserted to the Card slot or a

properly connected SCSI device.

❏ Settings Card, SCSI

File type File name

All AUTOLOAD.W2A

Plugin All Bulk 1

(for slot 1)

AUTOLD1.W2B

Plugin All Bulk 2

(for slot 2)

AUTOLD2.W2B

Plugin All Bulk 3

(for slot 3)

AUTOLD3.W2B

Set this to on.

Press the [SF5] button to register the device and

folder selected in step #1 (the folder containing the

desired files for auto loading).

Volume label of the device

Amount of total memory on the device

Amount of unused (free) memory on the device

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF8 Seite 264

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info