Bedienungsanleitung Yamaha MOTIF8 (Seite 22 von 33) (Englisch)

571289

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

FILTER Settings

Click on the text box and choose the ﬁlter type. The graph shows pre-deﬁned settings initially, but

you can edit these. Using the LPF type as an example, drag the left handle vertically to set the

Filter Gain. Drag the right handle horizontally to set the Filter Cutoff frequency.

nParameter values are shown when dragging the handles. To set these values directly, select the “FILTER

EG” tab of the “EL DETAIL” dialog.

EQ Settings

Click on the text box and choose the equalizer type. Using the EQ/LH type as an example, the

left handle controls the bass frequencies and the right handle controls the treble frequencies.

Drag the handles vertically to adjust gain, and horizontally to adjust the frequency.

nTo set these values directly, select the “OSCILLATOR” tab of the “EL DETAIL” dialog.

PITCH EG Settings

The PITCH EG (Envelope Generator) determines the transition in pitch while the key is being held

down. There are ﬁve handles, each controlling a different stage in the envelope.

The ﬁrst square mark (furthest to the left) controls the “Hold Time/Level.” The second controls the

“Attack Time/Level.” The third controls the “Decay 1 Time/Level.” The fourth controls the “Decay

2 Time/Sustain Level.” The last handle (furthest to the right) controls the “Release Time/Level.”

Drag the handles vertically to adjust levels, and horizontally to adjust the transition times.

nTo set these values directly, select the “PITCH” tab of the “EL DETAIL” dialog.

FILTER EG Settings

The FILTER EG (Envelope Generator) determines the transition in timbre while the key is being

held down. There are ﬁve handles, each controlling a different stage in the envelope. The ﬁrst

handle (furthest to the left) controls the “Hold Time/Level.” The second controls the “Attack Time/

Level.” The third controls the “Decay 1 Time/Level.” The fourth controls the “Decay 2 Time/

Sustain Level.” The last square mark (furthest to the right) controls the “Release Time/Level.”

Drag the handles vertically to adjust levels, and horizontally to adjust the transition times.

nTo set these values directly, select the “FILTER EG” tab of the “EL DETAIL” dialog.

AMPLITUDE EG Settings

The AMPLITUDE EG (Envelope Generator) determines the transition in amplitude over time.

There are ﬁve handles, each controlling a different stage in the envelope. The ﬁrst handle

(furthest to the left) controls the “Init Level.” The second controls the “EG Attack Time.” The third

controls the “EG Decay 1 Time/Level.” The fourth controls the “Decay 2 Time/Sustain Level.” The

last handle (furthest to the right) controls the “EG Release Time.” Drag the handles vertically to

adjust levels, and horizontally to adjust the transition times.

nTo set these values directly, select the “AMP EG” tab of the “EL DETAIL” dialog.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF8 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info