Bedienungsanleitung Yamaha MOTIF8 (Seite 24 von 33) (Englisch)

571289

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

& FILTER ....................Drag one of the handles horizontally to adjust the Element’s “HPF

Cutoff Frequency.” Drag the other handle vertically to adjust its “LPF

Resonance,” and horizontally to adjust its “LPF Cutoff Frequency.”

nTo set these values directly, select the “OSCILLATOR” tab of the DRUM KEY DETAIL Dialog.

* AMPLITUDE EG .....Drag the ﬁrst handle (furthest to the left) horizontally to adjust the

Element’s “Attack Time.” Drag the second horizontally to adjust its

“Decay 1 Time,” and horizontally to adjust its “Decay 1 Level.” Drag

the last handle (furthest to the right) horizontally to adjust its “Decay 2

Time.”

nTo set these values directly, select the “PARAMETER” tab of the DRUM KEY DETAIL Dialog.

( EQ ...........................Click on the text box and select the EQ type. With the “EQ L/H” and

“P.EQ” types, you can adjust some EQ parameters using the handles

in the graphs. Drag one of the handles horizontally to adjust the

Element’s “EQ Low Frequency,” and vertically to adjust its “EQ Low

Gain.” Drag the other handle horizontally to adjust the Element’s “EQ

High Frequency” (or “EQ Resonance” if the P.EQ type has been

chosen) and vertically to adjust its “EQ High Gain.”

nTo set these values directly, select the “OSCILLATOR” tab of the DRUM KEY DETAIL Dialog.

º LEVEL.....................Use this knob to set the level of the Element.

¡ PAN .........................Use this knob to set the stereo position of the Element.

™ RNDM PAN..............Use this knob to set the Element’s “Random Pan” depth.

£ ALTER PAN.............Use this knob to set the “Alternate Pan” depth.

¢ Output Assignment

selector ..................Click on the text box and select the output(s) to which the Element will

be sent.

∞ EF1/EF2/THRU .......Click the [EF 1] switch to pass the signal through Insertion Effect 1.

Click [EF 2] to pass it through Insertion Effect 2. Click [THRU] to

bypass the Insertion Effects.

§ REVERB..................Use the “REVERB” knob to set the level of the signal from Insertion

Effect 1/2 (or the by-passed signal) sent to the Reverb unit.

¶ CHORUS.................Use the “CHORUS” knob to set the level of the signal from Insertion

Effect 1/2 (or the by-passed signal) sent to the Reverb unit.

• DETAIL....................Click this to open the “DRUM KEY DETAIL” dialog and input all

Element values directly (except the Keyboard note assignment).

nThe signal output from EQ is sent to LEVEL at the left bottom of the Drum Key Dialog.

nIf the OSCILLATOR TYPE is set to “Voice,” parameters 7, 9 -14, 16 -19, 22, and 23 described

above are not available.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF8 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info