Bedienungsanleitung Yamaha MOX6 (Seite 35 von 76) (Englisch)

571302

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

MOX6/MOX8 Owner’s Manual

Quick Guide

4 Set the following parameters on each of the

Performance Record displays.

[F1] SETUP display

1 “SeqMode” = “song”

This setting lets you record your keyboard performance

to the Song.

2 “Number”

Select a destination Song. Executing Performance

recording overwrites and erases all the previously

recorded data of the specified Song. Make sure to select

a Song which contains no data.

3 “TimeSignature” = “4/4”

Set the same value here as that of the Arpeggio type.

Normally, set this to “4/4.”

4 “Tempo”

Set the desired tempo of the metronome and Arpeggio

for recording.

[F2] REC TR display

5 “RecTrack”

Select the destination Tracks from “1 – 4,” “5 – 8,” “9 – 12,”

and “13 – 16.”

[F3] OTHER display

6 “KeyOnStart” = “on”

When set to “on,” recording starts immediately when you

press any note on the keyboard. Set this parameter to “on”

when using the Arpeggio.

7 “CopyPerfParam” = “on”

Set this to “on” when you wish to copy the parameter

settings for the Performance Parts 1 – 4 to the destination

Parts of the Song.

8 “MoveToRecMode” = “on”

Set this to “on” when you wish to move to the Song mode

(specified via the SeqMode) after recording ends.

[F5] CLICK

9 (click on)

Press the [F5] button to turn the metronome on if you wish

to use the metronome.

5 Press any note to start recording.

Play the keyboard in time with the metronome. You can

change the Arpeggio type and settings by pressing any of

the [SF1] – [SF6] buttons while recording.

6 Press the [J] (Stop) button to stop recording.

Recording stops and the instrument enters the Song mode.

After recording, the created data will be automatically stored

to internal Song/Pattern memory. Press the [F] button to

hear your newly recorded performance.

Record your keyboard performance to additional Tracks in

Song Record as desired, and edit the recorded data in the

Song Edit or Song Job to finalize the Song data.

NOTE

Regarding Arpeggios, not only the played notes but also all

note events of Arpeggio playback will be recorded.

7 After completing, press the [STORE] button to

store the Song.

Recording Arpeggio playback to a

Pattern

If you record your keyboard playing along with Arpeggio

playback in the Performance mode to a Pattern, you can

quickly create full and complete rhythm patterns lasting just

a few measures. These short Patterns of MIDI sequence

data can be played back repeatedly in a loop and then

conveniently used as ‘building blocks’ for your original

Songs.

The Performance Recording to a Pattern operation is the

almost same as that of Recording to a Song, with the

exception of the settings below.

In the Performance Record display, set the “Section” and

“SectionLength” as well as the same settings as in

“Recording the melody and Arpeggio playback to the Song.”

Section

From A – P, select the Section which comprises the Pattern. If

you create several Sections, you can use them as rhythm

variations within a single Song.

Section Length

Set the length of the selected Section. Set the value to 1 – 4

according to the length of the current Arpeggio types.

After creating the Pattern Sections, program their playback

order to create a Pattern Chain. For details, see page 47.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOX6 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOX6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info