Bedienungsanleitung Yamaha MOX8 (Seite 39 von 76) (Englisch)

571303

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

MOX6/MOX8 Owner’s Manual

Quick Guide

Creating a Drum part via Step

Recording

Now, try creating a Song.

First, record a 4-measure drum phrase as shown below to

Track 1 by using Step Recording.

1 Press the [SONG] button to call up the Song Play

display then select an empty Song.

2 On the [F1] PLAY display, set the time signature to

“4/4.”

3 Press the [REC] button, followed by the [F1]

SETUP button, then set the parameters as below.

• Type = step

• Event = note

• Rec Track = 1

If necessary, set the tempo to the desired value.

Press the [F2] VOICE button, followed by the

[CATEGORY SEARCH] button, then select the

Drum Voice.

Set the Main Category to “Drum/Percussion” then set the Sub

Category to “Drums.” Move the Cursor [>] button to call up

the Drum Voice List. From this list, select “PDR B09 Analog”

then press the [ENTER] button.

Press the [

] (Play) button to enter the Step Record

mode.

The [F] button lamp lights and the Step Record display

appears.

6 Set the “Step Time” to “480.”

The “Step Time” parameter determines to what position the

pointer will advance after a note has been entered. Here,

the pointer will advance in quarter-note steps.

7 Press the [P] (Top) button to return to the top of

the Song, then press the B0 key four times.

The Bass Drum Kick sound (assigned to the B0 key) is

recorded to the timing of each beat.

NOTE

If you are using the MOX6, use the [OCTAVE] buttons to

make sure that the Bass Drum Kick sounds when you play

the B0 key. This is necessary since the MOX6 has a shorter

keyboard and doesn’t have a B0 key.

8 Press the [J] (Stop) button to stop recording.

This returns to the Song Play display.

9 To record another percussion sound, press the

[REC] button then the [F] (Play) button to enter

the Step Record mode again.

The [F] button lamp lights and the Step Record display

appears.

10 Set the “Step Time” to “ 240.”

The Step Time parameter determines to what position the

pointer will advance after a note has been entered. Here,

the pointer will advance in eighth-note steps.

11 Press the [

] (Top) button to return to the top of

the Song, then press the [F3] REST button and

G 1 key four times.

An eighth-note rest is recorded to each down beat and the

Hi-Hat Cymbal sound (assigned to the G 1 key) is recorded

to each up beat.

NOTE

If you are using the MOX6, use the [OCTAVE] buttons to

make sure that the Hi-Hat Cymbal sounds when you play

the G 1 key. This is necessary since the MOX6 has a shorter

keyboard and doesn’t have a G 1 key.

12 Press the [J] (Stop) button to stop recording.

This returns to the Song Play display.

After executing the above operations (steps 1 – 12), you

should now have a 1-measure drum phrase as shown below.

Press the [

] (Top) button, then press the [

]

(Play)

button to hear the recorded data.

To stop playback, press the [J] (Stop) button.

Time signature

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOX8 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOX8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info