Bedienungsanleitung Yamaha MOX8 (Seite 45 von 76) (Englisch)

571303

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

MOX6/MOX8 Owner’s Manual

Quick Guide

Creating a Pattern (Section A) by

using Arpeggio

In addition to creating a Pattern by recording your keyboard

performance conventionally, you can also use the powerful

Arpeggio playback features of this instrument.

Here, create data for Section A by recording Arpeggio

playback to Track 1 as the drum part, Track 2 as the guitar

part and Track 3 as the bass part.

1 Press the [PATTERN] button to enter Pattern Play

then select a Pattern.

2 Press the [PATTERN SECTION] so that its lamp

lights then press the Number [1] button to select

Section A.

On the Pattern Play display, set the Pattern Length,

Time Signature and Tempo.

4 Press the [TRACK] so that its lamp lights then

press the Number [1] button to select Track 1.

5 Press ARP [EDIT]  [F3] MAIN, then set the

“Switch” parameter to “on” and set the

“VoiceWithARP” parameter to “on.”

With the “Switch” parameter “on,” the Arpeggio of Track 1

can be played back. When the Arpeggio Type is selected

with the “VoiceWithARP” parameter “on,” the Voice

appropriate for the selected Arpeggio Type will be

automatically called up.

6 Press the ARP [ON/OFF] button so that its lamp

lights.

7 Press the [F2] TYPE button then select the

desired Arpeggio Type assigned to the [SF1] –

[SF6] buttons.

Changing the Arpeggio Type will call up a different Voice

since the “VoiceWithARP” parameter is set to “on.” If you want

to record a drum pattern, for example, set the Category to a

drum/percussion-like name then find the desired Arpeggio

Type.

8 Press the [REC] button then set the parameters

for recording on the [F1] SETUP display as below.

• “Type” = “replace”

• “Loop” = “off”

• “Quantize” = “off”

Set the other parameters if necessary.

9 Press the [F5] CLICK button to set the click to on

().

10 Press the [F] (Play) button to start recording.

Play the keyboard to trigger Arpeggio playback. Since the

“Loop” parameter is set to “off,” recording will be finished

automatically when the end of the Pattern Length is

reached.

NOTE

All the notes generated via Arpeggio playback will be

recorded.

11 After recording is completed, press the ARP

[EDIT] and [F3] MAIN buttons then set the

“Switch” parameter of Track 1 to “off.”

Since all the notes generated via Arpeggio playback are

recorded in this example, it is not necessary to trigger the

Arpeggio during playback. This is why the “Switch”

parameter is set to “off” here.

12 Press the [F] (Play) button to hear the recorded

Phrase.

Time Signature Tempo Length

Recorded Data as a User Phrase

The MIDI note sequence data (except for the Voice setting,

etc.) recorded in the Pattern mode will be stored as a User

Phrase. The stored User Phrase can be assigned to a different

Section/Track from the [F4] PATCH display in the Pattern Play

mode. This allows you to use already recorded User Phrases

for the other different Sections/Tracks. A single Pattern provides

memory space for 256 of your own original User Phrases.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOX8 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOX8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info