Bedienungsanleitung Yamaha MOX8 (Seite 46 von 76) (Englisch)

571303

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

MOX6/MOX8 Owner’s Manual

Quick Guide

13 Record Phrases to the other Tracks of Section A

as desired using the same operation.

Record a bass line to Track 2, then record guitar backing to

Track 3 by repeating steps 4 – 13 above.

14 Press [STORE]  [F1] SEQ  [ENTER] to store the

recorded Phrases as a Pattern.

This operation will store all the Song/Patterns.

Now that you’ve recorded Section A, go on to the following

instructions and create Section B by using the Pattern Copy

Job with the already recorded User Phrases.

Creating another Pattern (Section

B) by using already recorded data

Here, you’ll learn how to create a Section B by using recorded

data copied from Section A. For example, the drum part and

bass part will be copied from Section A, and the guitar part

will be created via the same note data as that of the bass part.

First, copy all the recorded data from the Section A to Section

B by using the Pattern Copy Job.

1 Press [PATTERN]  [JOB] to enter the Pattern Job.

2 Press the [F6] PATTERN button, select “01: Copy

Pattern” then press the [ENTER] button.

The Copy Pattern Job display appears.

3 Select the Pattern number and Section to be

copied.

For the copy source, select the Pattern number and Section

which you have already recorded in the previous section.

For the copy destination, select the same Pattern number

and “Section B.”

4 Press the [ENTER] button to execute the Pattern

Copy Job.

All the data of Section A will be copied to Section B.

5 Press the [EXIT] button a few times to return to

Pattern Play.

6 Press the [PATTERN SECTION] button so that its

lamp lights then press the Number [2] button.

Section B is now selected. Press the [F] (Play) button to

hear Section B and confirm that the Section B data has been

copied from Section A.

Have the guitar and bass play together by using the user

phrase of the bass recorded in Section A.

7 Press the [F4] PATCH button to call up the PATCH

display.

8 To Track 3 (guitar part), assign the same Phrase as

that of Track 2 (bass part).

This operation will have the guitar (Track 3) and bass (Track

2) play the same Phrase in unison.

Copying the Pattern data

Source Destination

Assign the already recorded data

(User Phrase)

HINT

Pattern Patch display

On the Pattern Patch display, only the User Phrase contained

in the current Pattern can be assigned to any Track. If you wish

to use Phrases belonging to other Patterns, follow the

instructions below:

1 Press the [SF6] COPY button.

2 Select the desired Phrase as the copy source.

3 Select the User Phrase number and Track number as the

copy destination.

4 Press the [ENTER] button to execute the Copy operation.

The amount of measures

Phrase number

Assign the same Phrase as that of Track 2.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOX8 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOX8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info