Bedienungsanleitung Yamaha MOXF6 (Seite 18 von 80) (Englisch)

571309

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

MOXF6/MOXF8 Owner’s Manual

Setting Up

Auto Power Off function

To prevent unnecessary power consumption, this instrument

features an Auto Power Off function that automatically turns

the power off if the instrument is not operated for a specified

period of time.

 Auto Power Off Setting

The amount of time that elapses before the power is

automatically turned off can be set.

 Disabling Auto Power Off (simple method)

Turn the power on while holding down the lowest key on the

keyboard. A “Auto power off disabled.” indication appears

briefly and Auto Power Off is disabled. The setting is retained

even if the power is turned off.

NOTICE

• Even when the power is turned off, electricity is still flowing to the

instrument at the minimum level. To shut off the electricity

completely, make sure you unplug the power cord from the wall AC

outlet.

• Depending on the instrument status, the power may not turn off

automatically, even after the elapse of the specified period of time.

Always turn off the power manually when the instrument is not in

use.

• When the instrument is not operated for a specified period of time

while connected to an external device such as an amplifier, speaker

or computer, make sure to follow the instructions in the Owner’s

Manual to turn off the power to the instrument and the connected

devices, in order to protect the devices from damage. If you do not

want the power to turn off automatically when a device is

connected, disable Auto Power Off.

• The setting will revert to its default value if not backed up before the

power is turned off.

• When Auto Power Off is set to “off,” the value will be retained even if

the backup data saved on another device is loaded to the

instrument. When Auto Power Off is set to something other than

“off,” the value will be overwritten with loaded data.

NOTE The setting time is approximate.

NOTE To turn the power on after Auto Power Off has been executed,

press the Standby/On switch once to the Standby position, and

then press it again to the On position.

NOTE When the factory settings are restored, the setting time is

changed to the default value (30 min.).

Adjusting the volume and

the brightness of the

display

Adjust the volume levels of this instrument and the connected

amplifier/speaker system.

NOTE

When connecting to a set of powered speakers or PA equipment,

set the MASTER VOLUME to about 70%, then raise the volume of

the powered speakers or PA equipment to the appropriate level.

If the display is not easily visible, press the [INC]/[DEC] button

while holding the [UTILITY] button to adjust for optimum

visibility.

CAUTION

Do not listen with the headphones at high volume for long periods of

time. Doing so may cause hearing loss.

Instructions: [UTILITY]  [F1] GENERAL  [SF6] OTHER

 Set “AutoOff”  [STORE]

Setting Value

(min.):

off (Disables Auto Power Off), 5, 10, 15, 30,

60, 120

Default Setting

(min.):

Adjust the volume with the

MASTER VOLUME slider.

Adjust the display contrast.

Max.

Min.

MOXF6/MOXF8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOXF6 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOXF6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info