571309
20
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
MOXF6/MOXF8 Owner’s Manual
Setting Up
20
Resetting User Memory to
the initial factory settings
The original factory settings of this synthesizer’s User
Memory can be restored as follows.
NOTICE
When the factory settings are restored, all the Voice, Performance,
Song, Pattern, and system settings in the Utility mode you created will
be erased. Make sure you are not overwriting any important data. Be
sure to save all important data to your USB flash memory device
before executing this procedure (page 60).
1 Press the [UTILITY] button then the [JOB] button to
call up the Factory Set display.
2 Press the [ENTER] button.
The display prompts you for confirmation. To cancel this
operation, press the [EXIT] button here.
NOTICE
When entering a checkmark to the box of Power On Auto Factory Set
and executing Factory Set, the Factory Set operation will
automatically be executed each time you turn the power on. Keep in
mind that this also means that your original data in Flash ROM will be
erased each time you turn on the power. Therefore, the checkmark of
this box should normally be removed. If you remove the checkmark of
this box and execute Factory Set, the Factory Set operation will not
be executed when turning the power on the next time.
3 Press the [ENTER] button to execute Factory Set.
After Factory Set has been completed, a “Completed”
message appears and operation returns to the original
display.
NOTICE
For Factory Set operations that take longer to process, you will see
the message “Now executing Factory Set…” during processing.
While such a message is shown on the display, never attempt to turn
off the power. Turning the power off in this state results in loss of all
user data and may cause the system to freeze (due to corruption of
data in the Flash ROM). This means that this synthesizer may not be
able to start up properly, even when turning the power on next time.
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha MOXF6 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha MOXF6

Yamaha MOXF6 Installationsanweisung - Deutsch - 5 seiten

Yamaha MOXF6 Bedienungsanleitung - Deutsch - 14 seiten

Yamaha MOXF6 Bedienungsanleitung - Deutsch - 57 seiten

Yamaha MOXF6 Installationsanweisung - Deutsch - 6 seiten

Yamaha MOXF6 Bedienungsanleitung - Deutsch - 80 seiten

Yamaha MOXF6 Installationsanweisung - Englisch - 5 seiten

Yamaha MOXF6 Bedienungsanleitung - Englisch - 14 seiten

Yamaha MOXF6 Bedienungsanleitung - Englisch - 57 seiten

Yamaha MOXF6 Installationsanweisung - Englisch - 6 seiten

Yamaha MOXF6 Bedienungsanleitung - Holländisch - 80 seiten

Yamaha MOXF6 Bedienungsanleitung - Französisch - 57 seiten

Yamaha MOXF6 Installationsanweisung - Französisch - 14 seiten

Yamaha MOXF6 Installationsanweisung - Französisch - 6 seiten

Yamaha MOXF6 Bedienungsanleitung - Italienisch - 80 seiten

Yamaha MOXF6 Bedienungsanleitung - Spanisch - 80 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info