Bedienungsanleitung Yamaha MX49 (Seite 64 von 71) (Englisch)

571261

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

File Utility RemotePerformance Song/Pattern

MX49/MX61 Reference Manual

Utility

General

MIDI

Controllers

Remote

Utility Job

QuickSeup

Factory Set

Version

Utility

In the Utility display, you can set parameters that apply to the entire system of the MX49/MX61. To return to the

Performance display after making settings, press [EXIT].

Operation

Press [UTILITY]  Select desired display for editing by using the Cursor [u]/[d] buttons  Press

[ENTER]  Edit parameters in selected display

General

Parameter Description

MasterVolume Determines the overall volume of the instrument.

Settings: 0 – 127

Note Shift Determines the amount (in semitones) by which the pitch of all notes is shifted.

Settings: -24 – +0 – +24

Tune

(Master tune)

Determines the fine tuning of the MX49/MX61’s overall sound (in 0.1 cent steps).

Settings: -102.4 (414.7Hz) – +0.0 (440.0Hz) – +102.3 (466.8Hz)

NOTE

The frequency of the basic pitch (note A3) is 440 Hz. An increase of 3 or 4 cents corresponds to a

frequency increase of about 1 Hz.

DirectMonitor

(Direct monitor switch)

When using this instrument with a computer, this determines whether the audio signal of this instrument is

output or not to the OUTPUT [L/MONO]/[R] jacks and [PHONES] jack (Direct Monitoring). If you wish to hear

only the sound which is looped back from the computer via the USB [TO HOST] terminal, set this parameter

to off. You can use this setting when you want to apply a VST plug-in effect (on the computer) to the sound

of the instrument.

Settings: off, on

DAW Level Adjusts the volume of the audio data from the USB [TO HOST] terminal.

Settings: 0 – 127

WAV Volume Adjusts the volume of the audio data of the USB flash memory. This parameter is linked to the same

parameter of the Song display (page 58).

Settings: 0 – 127

Octave

(Octave shift)

Determines the amount in octaves by which the range of the keyboard is shifted up or down. This parameter

is linked with the OCTAVE [-]/[+] buttons on the panel.

Settings: -3 – +0 – +3

Transpose Determines the amount in semitones by which the range of the keyboard is shifted up or down.

Settings: -11 – +0 – +11

NOTE

If you transpose beyond the note range limits (C -2 and G8), notes in the adjacent octaves will be used.

VelCurve

(Velocity Curve)

Determines how the actual velocity will be generated and transmitted according to the velocity (strength)

with which you play notes on the keyboard.

Settings: norm, soft, hard, wide, fixed

norm (normal) .. This linear “curve” produces one-to-one correspondence between the strength of your

keyboard playing (velocity) and the actual sound change.

soft ................... This curve provides increased response, especially for lower velocities.

hard.................. This curve effectively lessens the overall response in comparison to the “norm” curve.

wide ................. This curve accentuates your playing strength by producing lower velocities in response to

softer playing and louder velocities in response to harder playing. As such, this setting

effectively expands the dynamic range.

fixed ................. This setting produces the same amount of sound change (set in “FixedVelocity” below), no

matter what your playing strength. The velocity of the notes you play are fixed at the value

set here.

FixedVelocity Determines the velocity value for the “fixed” Velocity Curve setting above. This can be used to send a fixed

velocity to the tone generator regardless of how hard or soft you play the keyboard. This parameter is only

available if you set Velocity Curve above to “fixed.”

Settings: 1 – 127

LCD Contrast Adjusts the LCD contrast.

Settings: 1 – 8

NOTE

You can also adjust the LCD contrast by holding down [UTILITY] and pressing [INC/YES]/[DEC/NO].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MX49 Seite 64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MX49

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info