Bedienungsanleitung Yamaha MX49 (Seite 65 von 71) (Englisch)

571261

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

File Utility RemotePerformance Song/Pattern

MX49/MX61 Reference Manual

Utility

General

MIDI

Controllers

Remote

Utility Job

QuickSeup

Factory Set

Version

KnobFuncDispSw

(Knob Function display

switch)

Determines whether the Knob Function display (which shows the functions of Knobs [A] – [D] and their

settings) is called up or not when pressing the [KNOB FUNCTION] button.

Settings: Settings: off, on

KnobDispTime

(Knob Function display

switch)

Determines whether or not the Knob Function display appears when operating the Knobs, and how long the

display will continue to be shown.

Settings: off, 1 sec, 1.5 sec, 2 sec, 3 sec, 4 sec, 5 sec, keep

off..................... When this selected, the display is not called up even if you operate the Knobs.

1 sec – 5 sec.... Turning one of the Knobs will cause the display to appear after an elapsed time of between

1 – 5 seconds, and then automatically close.

keep................. Operating the Knob will cause the popup to be shown continuously until you press a

button.

StartUp Determines the default power-on Performance—letting you select which Performance is automatically

called up when you turn the power on.

Settings: 1 -128

AutoOff

(Auto Power Off time)

Determines the amount of time that elapses before the power is automatically turned off if the instrument is

not operated for a specified period of time. Default setting is “30min.”

Settings: off (Disables Auto Power Off), 5min, 10min, 15min, 30min, 60min, 120min (minutes)

NOTE

You can set this parameter to “off” by holding down the lowest key on the keyboard and turning the power

on. This operation retains the “off” setting even if the power is turned off.

MIDI

Parameter Description

MIDI IN/OUT Determines which physical output/input terminal(s) will be used for transmitting/receiving MIDI data.

Settings: MIDI, USB

NOTE

The two types of terminals above cannot be used at the same time. Only one of them can be used to

transmit/receive MIDI data at a time.

LocalCtrl

(Local Control switch)

Determines whether or not the tone generator of the instrument responds to your keyboard playing. Normally,

this should be set to “on”—since you’ll want to hear the sound of the MX49/MX61 as you play it. Even if this is

set to “off,” the data will be transmitted via MIDI. Also, the internal tone generator block will respond to

messages received via MIDI.

Settings: off (disconnect), on (connect)

BankSel

(Bank Select)

Determines whether or not this instrument enables Bank Select messages to be both transmitted and

received. When this is set to “on,” this synthesizer responds to incoming Bank Select messages, and it also

transmits appropriate Bank Select messages (when using the panel).

Settings: off, on

PgmChange

(Program Change)

Determines whether or not this instrument enables Program Change messages to be both transmitted and

received. When this is set to “on,” this synthesizer responds to incoming Program Change messages, and it

also transmits appropriate Program Change messages (when using the panel).

Settings: off, on

Parameter Description

*Cut**Rez**Cho**Rev

(+34)*:00***40***12

Knob Function display appears when pressing [KNOB FUNCTION].

qw**Common*Cutoff***

e*******(+15)******

Knob Function display appears when operating the Knobs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MX49 Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MX49

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info