Bedienungsanleitung Yamaha MX61 (Seite 66 von 71) (Englisch)

571260

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

File Utility RemotePerformance Song/Pattern

MX49/MX61 Reference Manual

Utility

General

MIDI

Controllers

Remote

Utility Job

QuickSeup

Factory Set

Version

CtrlReset

(Controller Reset)

Determines the status of the controllers (Modulation Wheel, Foot Controller, Knobs, etc.) when switching

between Voices. When this is set to “hold,” the controllers are kept at the current setting. When this is set to

“reset,” the controllers are reset to the default states (below).

Settings: hold, reset

If you select “reset,” the controllers will be reset to the following states/positions. As for controllers that are

not actually available on the instrument itself (for example, After Touch, Ribbon Controller, and Breath

Controller), these functions can be enabled by transmitting the corresponding MIDI control number from an

external MIDI controller.

Pitch Bend Center Ribbon Controller Center

Modulation Wheel Minimum Breath Controller Maximum

After Touch Minimum Assignable Function off

Foot Controller Maximum Expression Maximum

Footswitch off

MIDI Sync Determines whether Song/Pattern/Arpeggio playback will be synchronized to the instrument’s internal clock

or an external MIDI clock.

Settings: internal, external, auto

internal.....Synchronization to internal clock. You can use this setting when this tone generator is to be used

alone or as the master clock source for other equipment.

external....Synchronization to a MIDI clock received from an external MIDI instrument via MIDI. Use this

setting when an external sequencer is to be used as the master.

auto..........When MIDI clock is transmitted continuously from an external MIDI device or computer, the

internal clock of the MX49/MX61 is automatically disabled and the MX49/MX61 is synchronized

with the external clock. When MIDI clock is not transmitted from the external MIDI device or

computer, the internal clock of the MX49/MX61 continues to run in sync with the latest received

tempo of the external MIDI device or computer (DAW software). This setting is useful when you

wish to alternate between external clock and internal clock.

NOTE

When setting the MX49/MX61 so that Song/Pattern/Arpeggio playback is synchronized to an external MIDI

clock, make sure to set the devices so that the MIDI clock from the DAW software/ external MIDI device is

properly transmitted to the MX49/MX61.

ClockOut

(MIDI Clock Out)

Determines whether MIDI clock (F8) messages will be transmitted via the MIDI OUT/USB terminal.

Settings: off, on

SeqCtrl

(Sequencer Control)

Determines whether or not Sequencer Control signals—start, continue and stop—will be received and/or

transmitted via MIDI.

Settings: off, in, out, in/out

off.............Not transmitted/recognized.

in..............Recognized, but not transmitted.

out............Transmitted, but not recognized.

in/out........Transmitted/recognized.

BasicCh

(Basic Channel)

Determines the MIDI transmit/receive channel for an entire Performance.

Settings: 1 – 16, off

NOTE

The MIDI transmit/receive channel for Part 1–16 is fixed to 1 – 16 regardless of the “BasicCh” setting.

DeviceNo.

(Device number)

Determines the MIDI Device Number. This number must match the Device Number of the external MIDI

device when transmitting/receiving bulk data, parameter changes or other System Exclusive messages.

Settings: 1 – 16, all, off

RcvBulk

(Receive Bulk switch)

Determines whether or not Bulk Dump data can be received.

Settings: protect (not received), on (received)

BulkInterval

(Bulk Dump Interval)

Determines the interval time of the Bulk Dump transmission when the Bulk Dump function is used or a Bulk

Dump Request is received.

Settings: 0 – 900 ms

Parameter Description

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MX61 Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MX61

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info