Bedienungsanleitung Yamaha MX61 (Seite 67 von 71) (Englisch)

571260

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

File Utility RemotePerformance Song/Pattern

MX49/MX61 Reference Manual

Utility

General

MIDI

Controllers

Remote

Utility Job

QuickSeup

Factory Set

Version

Determines Controller Assign settings common to the entire system of the MX49/MX61. You can assign MIDI Control

Change Numbers to the Knobs on the front panel and external controllers. For example, you could use the ASSIGN 1

and 2 knobs to control effect depth for two different effects, while using the Foot Controller to control modulation. These

Control Change Number assignments are known as “Controller Assign.”

NOTE As for controllers that are not actually available on the instrument itself, they can be controlled by transmitting the corresponding

MIDI control number from an external MIDI controller.

Controllers

Parameter Description

FS Pedal

(Foot Switch Sustain Pedal

Select)

Determines which model of an optional Foot Switch connected to the [SUSTAIN] jack is recognized.

When the FC3 is used:

When you connect an optional FC3 (compatible with the Half Damper feature) for producing the special

Half Damper effect (as on a real acoustic piano), set this parameter to “FC3 (Half on).” If you don’t need

the Half Damper feature or want to disable it while still using an FC3, set this parameter to “FC3 (Half off).”

When the FC4 or FC5 is used:

Select “FC4/5.” The FC4 and FC5 are not compatible with the Half Damper feature.

Settings: FC3 (Half on), FC3 (Half off), FC4/5

NOTE

Note that this setting is not necessary when controlling the Half Damper feature via Control Change

messages from an external MIDI device to the instrument.

(Foot switch Control

Number)

Determines the Control Change number generated by using a Footswitch connected to the [SUSTAIN]

jack. Keep in mind that if the same MIDI Control Change messages set here are received from an

external device, the internal tone generator also responds to those messages as if the Footswitch of the

instrument itself was used.

Settings: off, 1 – 95, arp sw, play/stop, PC inc, PC dec, octave reset

NOTE

An FC4 or FC5 connected to the [SUSTAIN] jack can be used to start and stop the Song/Pattern by

setting this parameter to “Play/Stop.” Also, an FC4 or FC5 can be used to switch Performances by setting

this parameter to “PC inc”/”PC dec.” Keep in mind that the sustain function cannot be used in these

cases.

AS1

(Assign 1 Control number)

AS2

(Assign 2 Control Number)

Determines the Control Change number generated when you use the ASSIGN 1/2 knobs. Keep in mind

that if the same MIDI Control Change messages set here are received from an external device, the

internal tone generator also responds to those messages as if the ASSIGN 1/2 knobs of the instrument

itself were used.

Settings: off, 1 – 95

FC1

(Foot Controller 1 Control

Number)

Determines the Control Change number generated when you use the Foot Controller connected to the

[FOOT CONTROLLER] jack. Keep in mind that if the same MIDI Control Change messages set here are

received from an external device, the internal tone generator also responds to those messages as if the

Foot Controller of the instrument itself was used.

Settings: off, 1 – 95

FC2

(Foot Controller 2 Control

Number)

Determines the Control Change number corresponding to a Foot Controller 2 on an external device

connected to the MX49/MX61.

Settings: off, 1 – 95

(Ribbon Controller Control

Number)

Determines the Control Change number corresponding to a Ribbon Controller on an external device

connected to the MX49/MX61.

Settings: off, 1 – 95

(Breath Controller Control

Number)

Determines the Control Change number generated when you use a Breath Controller on an external

device connected to the MX49/MX61.

Settings: off, 1 – 95

AF1

(Assignable Function 1

Control Number)

AF2

(Assignable Function 2

Control Number)

Determines the Control Change number generated when you use Assignable Function 1/2 buttons on an

external device connected to the MX49/MX61.

Settings: off, 1 – 95

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MX61 Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MX61

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info