Bedienungsanleitung Yamaha P-155 (Seite 41 von 72) (Englisch)

599481

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Detailed Settings – [FUNCTION]

P-155 Owner’s Manual

ENGLISH

F2.2: Base Note

If you select a scale other than Equal Temperament, you

need to specify the root. (You can also specify the root

note with Equal Temperament selected, but it will have

no effect. The base note setting is effective for tunings

other than the Equal Temperament tuning.)

Setting range: C, C#, D, Eb, E, F, F#, G, Ab, A, Bb, B

Default setting: C

•Root indication example

You can set various parameters for Dual

(page 17) to optimize the settings for the

songs you play, such as adjusting the volume

balance between two voices.

Dual function settings are set individually for

each voice combination.

If Dual is not engaged, will appear

instead of and you will be unable to

select the Dual functions. If this happens, press

two voice buttons at the same time to engage

Dual.

F3.1: Dual Balance

Setting range: 0–20 (A setting of “10” produces an

equal balance between the two Dual

voices. Settings below “10” increase

the volume of Voice 2 in relation to

Vo ice 1, and settings above “10”

increase the volume of Voice 1 in

relation to Voice 2.)

Default setting: Different for each voice combina-

tion.

You can set one voice as the main voice, and another

voice as a softer, mixed voice.

F3.2: Dual Detune

Setting range: -20–0–20 (With positive values, the

pitch of Voice 1 is raised and the

pitch of Voice 2 is lowered. With neg-

ative values, the pitch of Voice 1 is

lowered and the pitch of Voice 2 is

raised.)

Default setting: Different for each voice combina-

tion.

Detune Voice 1 and Voice 2 for Dual to create a thicker

sound.

F3.3: Voice 1 Octave Shift

F3.4: Voice 2 Octave Shift

Setting range: –1, 0, 1

Default setting: Different for each voice combina-

tion.

You can shift the pitch up and down in octave steps for

Vo ice 1 and Voice 2 independently. Depending on which

voices you combine in Dual, the combination may sound

better if one of the voices is shifted up or down an octave.

F3.5: Voice 1 Effect Depth

F3.6: Voice 2 Effect Depth

Setting range: 0–20

Default setting: Different for each voice combina-

tion.

These functions make it possible to individually set the

depth of the effect for Voices 1 and 2 for Dual. (The effect

depth settings cannot be changed unless the [EFFECT] is

ON. Function must be exited before the [EFFECT] can be

turned ON.)

•“Vo ice 1” and “Voice 2” are explained on page 17.

F3.7: Reset

This function resets all Dual functions to their default

values. Press the [+/YES] button to reset the values.

F3. Dual Functions

Followed by

a high bar if sharp

Followed by

a low bar if ﬂat

(F#) (G) (Ab)

The available setting range is wider in the lower range (± 60 cents

for A-1), and narrower in the higher range (± 5 cents for C7). (100

cents equal one semitone.)

SHORTCUT:

You can jump directly to the Dual functions by pressing the

[TEMPO/FUNCTION] button while holding the two Dual voice but-

tons.

NOTE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha P-155 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha P-155

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info