Bedienungsanleitung Yamaha P-250 (Seite 63 von 102) (Englisch)

588674

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

P-250

Settings for Song Recording and Playback [SONG SETTING]

Edit Operation

■

Auditioning channel [ChannelListen]

You can select a single channel to listen to its contents.

Playback starts from the ﬁrst note.

Press the D [–]/[+] buttons to select a channel for play-

back. Press and hold down the B [+(YES)] button to play

the channel.

■

Deleting data from a channel [ChannelClear]

You can delete data from the 16 channels one by one or

all together.

Press the D [–]/[+] buttons to select a channel to delete,

and press the B [+(YES)] button to delete the data.

■

Specifying the range and playing back

repeatedly [FromToRepeat]

You can specify a range (in steps of beats) that you wish

to play back repeatedly.

•Playback repeats after it reaches the end point. (The

end point is not played.)

• If you start playing back a song with “Repeat On”

selected, the count down starts, followed by the

repeated playback of the speciﬁed part until you

press the [TOP] button.

• If you select “Repeat Off,” normal playback starts.

Press the B [–(NO)]/[+(YES)] buttons to select “Repeat

On” or “Repeat Off.” Press the C [–]/[+] buttons to spec-

ify the start point of the repeated range, and press the D

[–]/[+] buttons to specify the end point of the repeated

range.

■

Specifying a phrase for playback by phrase

number [PhraseMark]

If you select a song that contains “PhraseMark” data you

can specify phrase numbers to play back from the mark

point, or to play back repeatedly.

• If you start playing back a song with “Repeat On”

selected, the metronome sound starts ticking, fol-

lowed by the repeated playback of the speciﬁed

phrase until you press the [TOP] button.

• If you select “Repeat Off,” normal playback starts

from the speciﬁed phrase.

Press the C [–]/[+] buttons to specify a phrase number,

and press the B [–(NO)]/[+(YES)] buttons to select

“Repeat On” or “Repeat Off.”

You can set the phrase number to Off (not speciﬁed), or

from 1 through the last phrase number in the song.

• If you select a song that doesn’t contain “Phrase-

Mark” data, you can select only “Off”.

• Refer to page 61 for general information on setting the parameters.

• Refer to pages 3—5 of the separate “Data List” for information on the default parame-

ter settings.

TIP

Channels that do not contain any data are not displayed.

However, for some songs, all channels (including channels

that contain no data) may be displayed.

TIP

Channels that do not contain data are not displayed. How-

ever, for some songs, all channels (including channels that

contain no data) may be displayed.

NOTE

Save the edited song data to memory using the

“SaveToMemory” (page 54) parameter.

TIP

Press the C [–]/[+] and D [–]/[+] buttons to specify the range

to be repeated during song playback.

TIP

When you select another song, the speciﬁed range is auto-

matically cancelled and the Repeat function is turned off.

NOTE

If you set the [FromToRepeat] parameter for a song

recorded at free tempo, the timing of the metronome sound

and the song may occasionally not match.

NOTE

Some preset songs contain song data recorded at free

tempo.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha P-250 Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha P-250

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info