Bedienungsanleitung Yamaha P-250 (Seite 65 von 102) (Englisch)

588674

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

P-250 65

Edit Operation

Editing a Voice in Detail [VOICE EDIT]

This menu enables you to make detailed settings for the voices in Dual or Split mode, as well as for the

effects. You can make these settings for each voice or for a combination of voices. In addition, you can

listen to the notes you play on the keyboard while you change the settings.

Basic voice editing using [VOICE

EDIT]

1Select a voice and press the [VOICE EDIT] but-

ton to access the “VOICE EDIT” menu.

2Press the A [–]/[+] buttons to select the part

for which you wish to change the voice.

The range of the displayed voice part varies depend-

ing on the selected voice.

Main .................Voices for the Main part (page 29).

The Main part voice is used in non-

Split, non-Dual mode, or in Split

mode when the right-hand area is

not in Dual mode.

Main x Layer .....Voices for the Main or Layer part

(page 29). These voices are used in

Dual mode, or in Split mode when

the right-hand area is in Dual mode.

Left....................Voices for the Left part (page 28).

These voices are used in Split mode

when the left-hand area is not in

Dual mode.

Left x Layer........Voices for the Left or Layer part

(page 28). These voices are used in

Split mode when the left-hand area is

in Dual mode.

■Setting the octave* [Octave]

The pitch of a note can be shifted up or down by one or

two octaves.

Press the D [–]/[+] buttons to set the pitch to the range

from –2 (two octaves lower) through 0 (no pitch shift)

to +2 (two octaves higher).

■Setting the volume level* [Volume]

You can set the volume level for each voice.

Press the D [–]/[+] buttons to set the volume level (0 to

127).

• Refer to page 61 for general information on setting the parameters.

• Refer to pages 3—5 of the separate “Data List” for information on the default parame-

ter settings.

•All parameters accessed via the [VOICE EDIT] button are performance parameters (page 30).

VOICE/PERFORMANCETEMPOSONGSONG BALANCE

MASTER VOLUME

MIDI SETTING

CHORUS

REVERBSPLITCONTRAST

YESNO

BASS

7PERFORM. FILE

MASTER EQ EDIT

VARIATION

PERFORMANCE

VOICE EDITVIBES

GUITAR

SYNTH.PAD

E.PIANO3 HARPSI.

CLAVI.

ORGAN 1

EXIT

9 BA

G.PIANO 1

EX.TRACKS SONG FILE PANEL LOCK

TRACK1

TOPSONG SELECT

KEYBOARDSONG

MIN MAX

RECSTART/STOP

SYNCHRO STARTNEW SONG

TRACK2 MIDI OUT

ORGAN 2

G.PIANO 2

STRINGS

E.PIANO1

CHOIR

E.PIANO2

OTHER SETTING

DOWNSONG SETTING UP

[VOICE EDIT]

TIP

In Dual mode, assign parameters with an asterisk (*) to the

Main part and Layer part voices. In Split Dual mode, assign

them to the Main, Layer, Left, and Left/Layer part voices.

TIP

Parameter names enclosed in parentheses ( ) are dis-

played in Dual mode.

In Dual mode:

Voice for editing (Main part or Layer part)

In Dual mode:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha P-250 Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha P-250

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info