Bedienungsanleitung Yamaha P-250 (Seite 78 von 102) (Englisch)

588674

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

Other Settings [OTHER SETTING]

78 P-250

Edit Operation

■Specifying the depth of sustain sampling for

the damper pedal [SustainSamplingDepth]

This parameter is effective only on the voice group

GRANDPIANO1.

Press the D [–]/[+] buttons to set the value (Off, 1—10).

[SustainSamplingDepth] is a performance parameter

(page 30).

■Specifying the volume of the key-off sound

[KeyOffSamplingDepth]

You can adjust the volume of the key-off sound (the sub-

tle sound that occurs when you release a key).

This is effective on the voice groups GRANDPIANO1,

E.PIANO1, CLAVI., and HARPSICHORD.

Press the D [–]/[+] buttons to set the value (Off, 1—10).

[KeyOffSamplingDepth] is a performance parameter

(page 30).

■Selecting a pedal function for vibraphone

[VibraphonePedalMode]

This parameter enables you to select whether the sound

is sustained (a) while you press the keys on the keyboard

(“PianoLike”) or (b) while you press and hold down the

sustain pedal, like playing a real vibraphone (“Normal”).

Press the D [–]/[+] buttons to specify PianoLike or Nor-

mal.

[VibraphonePedalMode] is a performance parameter

(page 30)

■Assigning the START/STOP function to a

pedal [PedalStart/Stop]

If you assign the START/STOP function to a pedal and

activate the function, the pedal function assigned to the

pedal in the VOICE EDIT menu (page 69) is disabled.

Press the C [–]/[+] buttons to select a pedal (Pedal 2,

Pedal 3, Pedal 4) to assign the function, and press the D

[–]/[+] buttons to specify On or Off.

[PedalStart/Stop] is a performance parameter (page

30).

■Selecting a type of pedal [Pedal Type]

A pedal connected to the PEDAL [1 (SUSTAIN)], [2 (SOS-

UTENUTO)], [3 (SOFT)], [4 (AUX)] connector may

switch on and off differently. For example, some pedals

turn on the effects when pressed, and others turn them

off. Use this parameter to reverse this mechanism.

Press the C[–]/[+] buttons to select a pedal from Pedal 1,

Pedal 2, Pedal 3, or Pedal 4, then press the D [–]/[+] but-

tons to specify Make or Break.

■Setting the point at which the pedal starts to

affect the sound [HalfPedalPoint]

This parameter enables you to specify the point to which

you must depress the pedal before the assigned effect is

applied. (This setting applies to effects that can be

assigned to each pedal, such as damper or sostenuto

(page 69). Expression is not affected by this setting.) If the

effect is an on/off type, this setting speciﬁes the point at

which the effect will be switched on or off.

Press the D [–]/[+] buttons to specify from –2 (effective

with the shallowest press) to 0 to +2 (effective with the

deepest press).

[HalfPedalPoint] is a performance parameter (page

30).

• Refer to page 61 for general information on setting the parameters.

• Refer to pages 3—5 of the separate “Data List” for information on the

default parameter settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha P-250 Seite 78

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha P-250

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info