Bedienungsanleitung Yamaha P-255 (Seite 46 von 60) (Englisch)

583118

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Customizing with Function Parameters

P-255 Owner’s Manual

F7.5

Program change on/off status

MIDI Program Change messages can be sent from one

MIDI device to another in order to change its Voice. In

other words, your digital piano could use a Program

Change message to change the voice being used on a con-

nected device. (When a new Voice is selected using the con-

trol panel, the corresponding Program Change Number

would be sent.) Meanwhile, upon the receipt of a Program

Change message from a connected MIDI device, your digi-

tal piano can change the Voice being used to play the

received MIDI data (but not the Voice played via the key-

board). This parameter should therefore be set to “ON” if

you wish to send and receive MIDI Program Change mes-

sages, thereby linking Voices on the digital piano with those

on connected devices. If, however, you do not want to link

Voices in this way, you should set this parameter to “OFF”.

•Available settings: ON and OFF

•Default setting: ON

F7.6 Control change on/off status

MIDI devices use Control Change messages in order to

inform each other of damper pedal operations, volume

changes, and other actions associated with the expressive-

ness of a performance. In other words, your digital piano

could send Control Change messages via MIDI to affect the

sound of a performance being played on a connected

device. (Whenever you operate the instrument’s damper

pedal, it would send the corresponding Control Change

messages.) Meanwhile, upon the receipt of a Control

Change message from a connected MIDI device, your digi-

tal piano can change the sound of the MIDI performance

being played (but not the sound being played using the key-

board). This parameter can be used to turn on and off the

exchange of MIDI Control Change messages as appropri-

ate.

•Available settings: ON and OFF

•Default setting: ON

F7.7 Send initial setup

This parameter can be used as described below to send ini-

tial setup data—that is, the current state of control panel

settings—to a connected sequencer or other device. For

example, you could send this data before recording a per-

formance on the sequencer or device, thereby saving the

digital piano’s current settings at the beginning of the

recording. In addition, you could also send this data to the

tone generator of another instrument in order to configure it

in the same way as the digital piano’s.

Set the control panel as required.

Connect the sequencer and configure it to receive

and record the initial setup data.

Use the [FUNCTION] button to select Function

parameter F7.7.

Press the [+/YES] button to send the data.

The message “End” will be shown when the data has

been sent.

Initial setup data contains the following settings.

•Voice(s)

•Reverb type and depth

• Effect type and depth

• Split point

•Tuning system (F2.1)

•Dual balance (F3.1)

• Relative Voice detune (F3.2)

•Dual balance (F4.2)

• Certain pedal and special sound settings (F5.2 to F5.6)

Using your digital piano’s Backup function, you can save

Voice selections, reverb type, and many other settings to

ensure that they are retained when you turn off the instru-

ment. If turned on, this function will restore your previous

settings automatically when you turn on your digital piano.

If turned off, however, the settings stored in the instru-

ment’s internal memory will be lost; accordingly, the corre-

sponding defaults (page 48) will be restored when you next

turn it on. That said, performance data stored in the internal

memory, the character code setting, and the on/off status of

the Backup function will always be automatically retained.

As described below, the Backup function can be turned on

or off individually for different types of settings (i.e., Voice,

MIDI, tuning, and miscellaneous). The corresponding

Function-parameter settings will also be retained.

F8.1 Voice configuration backup

•Available settings: ON and OFF

•Default setting: OFF

Data retained

• Voice selection

• On/off status of Dual mode and the corresponding Voices

•Dual mode settings F3.1 through F3.6 (for each combination of

Voices)

• On/off status of Split mode and the corresponding Voices

• Split mode settings F4.1 through F4.7 (for each combination of

Voices)

•Reverb type and depth (for each Voice)

• Effect type and depth (for each Voice)

• Damper-pedal resonance depth (F5.2)

• Metronome volume (F6.1)

•Touch sensitivity settings, including fixed volume (F6.8 and F6.9)

• Refer to the MIDI Reference pdf manual for details of the MIDI Program Change

Numbers associated with the instrument’s Voices.

• Refer to the MIDI Reference pdf manual for details of the Control Change data

supported by your digital piano.

NOTE

F8. Backup and other settings

• It can take several seconds to save the instrument’s set-

tings. For this reason, any setting changed immediately

before the digital piano is turned off may not be retained.

NOTICE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha P-255 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha P-255

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info