Bedienungsanleitung Yamaha P-255 (Seite 47 von 60) (Englisch)

583118

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Customizing with Function Parameters

P-255 Owner’s Manual

F8.2 MIDI configuration backup

•Available settings: ON and OFF

•Default setting: ON

Data retained

• MIDI function settings F7.1, F7.2, and F7.4 to F7.6

F8.3

Tuning configuration backup

•Available settings: ON and OFF

•Default setting: ON

Data retained

• Transpose setting (page 16)

•Tuning (F1.)

•Tuning system and base note (F2.1 and F2.2)

F8.4 Miscellaneous backup

•Available settings: ON and OFF

•Default setting: ON

Data retained

• Pedal and special sound settings F5.1 and F5.3 to F5.8

• Rhythm playback volume (F6.2)

•Audio song playback volume (F6.3)

• MIDI song playback volume (F6.4)

•Fixed AUX OUT volume (F6.7)

• MIDI song playback channels (F7.3)

F8.5 Character code

If your digital piano cannot load an Import Song, there may

be an issue with the character code used for the name of the

corresponding file. This parameter can be used to change

the character code in such a case.

•Available settings: Int (International) and JA (Japanese)

•Default setting: Int

F8.6

F8.7 Save, Load

As described below, your digital piano’s settings in addition

to those songs recorded and/or stored on it (i.e., from User

MIDI) can be saved on a USB flash drive as a single file

(with a .bup file extension). Naturally, you can also read

each of these files back into the digital piano from a USB

flash drive in order to restore its settings and songs.

Plug in a USB flash drive.

With the [FUNCTION] button held down, use the

[-/NO] and [+/YES] buttons to select the required

function.

F8.6 ..........Save backup data

F8.7 ..........Load backup data

The message “bUP” (Save) or “rSt” (Load) will be

displayed when you press the [+/YES] button, fol-

lowed by the message “

n Y” (no/yes). Press the

[+/YES] button to perform the selected operation.

(You will need to press once again to confirm your

selection when loading.) When the operation has

been completed, the message “

End” will be

shown. After loading backup data, the digital piano

will automatically turn off and then back on.

If you wish to cancel the Save or Load operation, press

the [-/NO] button.

Backup file names

P-255.bup

F8.8 Auto Power-Off

Using this parameter, you can set the period of inactivity

after which the Auto Power-Off function (page 10) will

automatically turn off the digital piano.

•Available settings: OFF, 5, 10, 15, 30, 60, and 120 (minutes)

•Default setting: 30 (minutes)

F8.9 Format USB flash drive

Refer to page 33 for a description of the formatting proce-

dure.

•Available settings: n (no) and Y (yes)

• Do not turn off the instrument while saving or loading

backup data. Failure to observe this precaution may result

in the permanent loss of important data.

• Do not manually change the backup file name by using a

computer; doing so will render the file unloadable.

• When a USB flash drive is formatted, all of its content will be

deleted. Before formatting, therefore, ensure that the USB

flash drive contains no irreplaceable data.

NOTICE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha P-255 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha P-255

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info