Bedienungsanleitung Yamaha pdm 4210 (Seite 20 von 282) (Deutsch, Englisch, Französisch, Spanisch, Schwedisch)

140113

Zoom out

Zoom in

Vorherige Seite

1/282

Nächste Seite

ENGLISH

Picture

Audio

Timer

Function

Setup

Language

Select

OK Set

Function

Screen Saver Off

Screen Wipe On 60Min.

Black Side Panel Off

Video Power Save Off

Freeze Mode Split

Default Zoom Panoramic

Reset Reset

Select Set Return

FUNCTION MENU

Function

Panel Life Normal

Mode Display Off

ID Number 1

Inverse On 60Min.

Standby White Off

Gamma 2.2

Reset Reset

Select Set Return

Selected characters Setup hint

Screen Saver

Off 5Min. 10Min.

60Min. 40Min. 20Min.

This moves the picture around the screen in small amounts, at set

intervals, to reduce the panel image retention. Image retention

occurs when stationary objects, such as screen logos, leave a slight

image visible after they should have disappeared.

Screen Wipe

On 60Min.

This is used to reduce the panel image retention that can occur with

stationary pictures by displaying a completely white screen. Select

On (continuous operation) or 60 Min. (time limit operation) and press

the OK button. Press the MENU or RETURN button on the remote

control to return to normal viewing.

Black Side Panel

Off On

This turns the gray sidebars On/Off when watching normal mode

screen size area. It is always set to Off when the monitor is powered

On. It is recommended to set Black Side Panel to off to reduce the

panel image retention.

Video Power Save

Optional (grayed out)

Freeze Mode

Optional (grayed out)

Default Zoom

Optional (grayed out)

Reset

(Selects the Reset mode)

The original factory settings for the items of this Menu page can be

restored by pressing the OK button.

Panel Life

Normal Extend 1 Extend 2

This function suppresses the contrast of the screen regardless of the

Contrast setting in the Picture Menu. By this control, power

consumption can be reduced or degradation of a panel can be

mitigated.

The order of power consumption is Extend 2 < Extend 1 <

Normal.

If the Contrast setting is changed when this item is set to Extend 1 or

2, it will be changed to Normal automatically.

Mode Display

Off On

This functions displays the Input Signal Screen Display every time the

input mode and signal mode are changed.

Set to OFF if the Input Signal Screen Display is not needed when

switching signals.

ID Number

1 2 3 4

7 6 5

Assigns ID nos. to the monitors so that they can be controlled

individually (up to 7 monitors can be controlled).

Inverse

On 60Min.

This function changes each level of RGB signal invert to reduce the

panel image retention. When this function is required, select On

(continuous operation) or 60Min. (time limit operation) and press the

OK button. And press the Menu or Return button to exit.

Standby White

Off 15Min. 30Min.

120Min. 60Min.

This function is also provided to prevent image retention. If time is set

for this item, the screen changes into a white pattern when the

monitor enters power save mode, and continues for the period of

setting time.

Gamma

2.2 2.8

Normally set to 2.2.

▼

OPERATING INSTRUCTIONS (continued)

012_PDM-4210_G_ENG 2003.12.24 01:16 ページ 19 (ブラック版)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha pdm 4210 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha pdm 4210

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info