Bedienungsanleitung Yamaha pdm 4210 (Seite 21 von 282) (Deutsch, Englisch, Französisch, Spanisch, Schwedisch)

140113

Zoom out

Zoom in

Vorherige Seite

1/282

Nächste Seite

Selected characters Setup hint

Auto Adjust*

(Menu) (Adjust)

Press the OK button to start

automatic regulation.

Horizontal Position, Vertical Position, Horizontal Clock and Clock

Phase are adjusted automatically.

Horizontal Position

Moves the horizontal position

to left.

Moves the horizontal position

to right.

Adjust the left-side display position.

(This function is only for RGB2. It is not available (grayed out) for

RGB1.)

Vertical Position

Moves down the vertical

position.

Moves up the vertical position.

Adjust the vertical display position.

(This function is only for RGB2. It is not available (grayed out) for

RGB1.)

Horizontal Clock

Reduces the dot clock

frequency (shrinks the right

side).

Increases the dot clock

frequency (expands the right

side).

Adjust for maximum character clarity.

(This function is only for RGB2. It is not available (grayed out) for

RGB1.)

Clock Phase

Slows the dot clock phase

(shifts slightly to left).

Advances the dot clock phase

(shifts slightly to right).

Adjust for clear character visibility.

(This function is only for RGB2. It is not available (grayed out) for

RGB1.)

Reset

(Selects the Reset mode)

The original factory settings for the items of this Menu page can be

restored by pressing the OK button. (This is effective only for RGB2.)

Input Level

0.7V 1.0V

Normally set to 0.7 V. If white is found to spread across the screen, set

to 1.0 V. (This is effective only for RGB2.)

Frequency Display

Off On

Set this to Off if the frequency information of the Input Signal Screen

Display is not required.

WVGA Type

Off On

This is only available for W-VGA signal.

When it is set to On, the display area modecan be selected Full or

Real.

Vertical Filter

Off On

Turn On when concerned about screen flicker.

Frequency Mode

Movie PC

Set to Movie when viewing moving images on a personal computer.

RGB1

Optional (grayed out)

RGB2

Optional (grayed out)

SETUP MENU

Picture

Audio

Timer

Function

Setup

Language

Select

OK Set

Setup

Auto Adjust Adjust

Horizontal Position 0

Vertical Position + 31

Horizontal Clock – 20

Clock Phase 10

Reset Reset

Select Return Exit

Setup

Input Level 0.7V

Frequency Display Off

WVGA Type Off

Vertical Filter On

Frequency Mode Movie

RGB1 DVI-PC

RGB2 RGB

Select Set Return

OPERATING INSTRUCTIONS (continued)

* Depending on the type of signal displayed, displays may not be optimized through automatic adjustment. Adjust manually to optimize them.

▼

Horizontal Position 0

Next / Prev Adjust Return

Setup

Auto Adjust Adjust

Horizontal Position 0

Vertical Position + 31

Horizontal Clock – 20

Clock Phase 10

Reset Reset

Select Return Exit

Clock Phase 10

Next / Prev Adjust Return

012_PDM-4210_G_ENG 2003.12.24 01:16 ページ 20 (ブラック版)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha pdm 4210 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha pdm 4210

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info