669113
65
Zoom out
Zoom in
Vorherige Seite
1/94
Nächste Seite
63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
The PSR-2700 features a built-in digital voice sampling system that lets you digitally
record any sounds from a microphone or line-level source and play those sounds via the
four SAMPLE PADS and/or the keyboard. The Digital Sampling system can record a maxi-
mum of 6 seconds of sound per sample pad, up to a total of 60 seconds. A sampled
“voice” is a complete set of data for the four SAMPLE PADS.
PSR-2700 Digital Sampling
CAUTION
Never interrupt the PSR-2700 power supply - either by unplug-
ging the power cord or by turning the power switch off - during
sampling, during a clear operation, while the PSR-2700 is
processing sampled data (i.e. while “Squeezing” appears on the
display), or while loading sampled voices from disk. Doing so will
result in the loss of all data in the PSR-2700 wave RAM!
VOICE
NAME
FREQ TRIGGER
LEVEL
PITCH
MAPPINGVOICE #
REC
CLEAR
DIGITAL SAMPLING
INPUT LEVEL
MIN MAX
0 dB
6
12
18
24
30
36
SAMPLE PADS
1 2 3 4
Setting the Input Level
For optimum sound quality you’ll need to match the input sensitivity on the PSR-2700 Digital Sampling sys-
tem to the output level of your source. After connecting and preparing your source:
ZEngage the Level Check Mode..............................................................................................................
Press the DIGITAL SAMPLING section [REC] button. “LEVEL
CHECK MODE” will appear on the display and the [REC] indicator will
flash.
CD Player
REC
08:Showtune 001:GrandPno
----LEVEL CHECK MODE----
LINE
SAMPLE IN
MIC
To use the Digital Sampler you’ll need to connect the source you intend
to use to either the rear-panel SAMPLE IN LINE or MIC jack. If you’ll be
recording via a microphone, plug the microphone into the SAMPLE IN
MIC jack. If you’ll be recording from a line-level source such as a cassette
player or other audio playback device, plug the players line output into the
SAMPLE IN LINE jack. If your audio playback device has RCA pin-jack
type outputs you’ll need to acquire a cable or connector converter that al-
lows connection to the PSR-2700’s 1/4-inch mono phone jack.
NOTES
• Be sure to obtain proper permission when sampling copyrighted mate-
rial.
Connections
65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha PSR-1700 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info