The following functions provide a range of useful sample editing capabilities.
NOTES
• If the sample data cannot be edited the following messages will ap-
pear on the LCD display: “No Wave Data” if there is no data in the
pad; “Protected Voice” is the data is protected and cannot be edited
by the PSR-2700.
Press the [PITCH] button or any other function button — the
[VOICE#] button, for example — to exit from the pitch function.
ZHold [CLEAR] and Select the Voice Or a Pad......................................................................................
While holding the [CLEAR] button press the [VOICE #] button if you
want to clear the entire voice, or the SAMPLE PAD you want to clear if
you only want to clear one pad. The [CLEAR] button, pad indicator if a
pad was selected, and ARE YOU SURE? indicators will flash and the “Are
you sure?” prompt will also sound.
VOICE #
CLEAR
2
or
The contents of an entire sampled voice (four pads) or individual SAMPLE PADS can be completely cleared
(erased) as follows:
XClear the Voice or Pad...........................................................................................................................
Press the [YES] button to clear the current sample voice or selected
pad, or the [NO] button to cancel the clear operation.
NOTES
• In some cases “SQUEEZING XXX%” will appear on the display while
the PSR-2700 processes the sampled data during the clear process.
“XXXXKByteFree” will then appear, indicating the amount of RAM
remaining after the data has been processed.
• When a sample pad is cleared, the mapping applied to that pad is also
cleared and the default mapping will be restored.
ARE YOU SURE ?
YESNO
●Clearing Samples
ZHold [PITCH] and Select a Pad..............................................................................................................
While holding the [PITCH] button press the SAMPLE PAD containing
the sample you want to tune. The selected SAMPLE PAD indicator will
flash and its current pitch value will appear on the LCD display.
SAMPLE PADS
1234
PITCH
The pitch of each SAMPLE PAD can be adjusted over approximately a ±50-cent range (100 cents total —
approximately one semitone). This is a convenient way to tune samples to match the music in which they will be
used.
●Tuning the Samples
XSelect the Pitch.......................................................................................................................................
Use the [+] and [–] buttons, the number buttons, or the data dial to set
the pitch as required. The pitch range is from “–10” through “0” to “+10”. A
setting of “0” produces normal pitch. Each increment raises (+) or lowers (–
) the pitch by approximately 5 cents. You can play the pads while tuning to
check the sound.
The normal tuning value can be recalled instantly by pressing the [+]
and [–] buttons at the same time.
021
–+
RESET
08:Showtune001:Sampl001
AccOffPitchPAD2=0–0
If you press only the [PITCH] button SAMPLE PAD 1 will automati-
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Yamaha PSR-1700 wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.