Bedienungsanleitung Yamaha PSR-1700 (Seite 68 von 94) (Englisch)

669113

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

PSR-2700 Digital Sampling

■ Recording

NOTES

• Although a maximum of 255 individual samples can be recorded,

the samples have to be extremely short — a fraction of a second

each — to achieve this number. During normal sample recording the

sample memory is likely to become full long before the maximum of

255 samples is reached. The maximum total recording time — 60

seconds — is a more reliable guide as to how much of the sample

memory has been used or is available.

Each sampled “voice” recorded by the PSR-2700 can contain four separate samples, one in each SAMPLE

PAD. You can play the individual samples included in the selected sample voice by playing the appropriate pad,

or by playing on the keyboard when the VOICE section SAMPLED VOICE indicator is lit. When you play a

sampled voice via the keyboard, the four separate samples it contains are assigned to different ranges of the key-

board. This will be explained in more detail in the “Playing Samples via the Keyboard” section on page 70.

Your sampled voices will be retained in the PSR-2700 sample memory even when the power is turned off as

long as the backup batteries are installed on the AC plug is connected. Your samples can also be saved to and

loaded from disk so you can create and original sample library.

ZSelect a Sample Voice Number .............................................................................................................

Press the DIGITAL SAMPLING section [VOICE #] button. The cur-

rent selected sample voice number will appear on the LCD display panel.

Use the [+] and [–] buttons, the number buttons, the data dial, or the

[VOICE #] button itself to select the desired sample voice number. If the

selected voice number contains no data, “********” will appear on the

display in place of the voice name.

VOICE #

08:Showtune 001:GrandPno

AccOff SVC=0–01:********

Press the SAMPLE PAD to which you want to record while holding

the DIGITAL SAMPLING section [REC] button. “Sampling Ready” will

appear on the display. Recording will begin immediately if you set the

trigger level to “OFF” (see “Setting the Trigger Level, above). If you se-

lected automatic triggering, the [REC] button and selected SAMPLE PAD

will flash until recording is triggered by an input signal. When recording

starts, whether manual or triggered, the [REC] button indicator will light

continuously and “Sampling” will appear on the display.

NOTES

• The keyboard and other function buttons will not operate during

sample recording.

• If the “No Bank” or “Wave Ram Full” error message appears, there

is not enough memory available for sampling and some data will

have to be cleared before sampling will be possible (See “Error

Messages” on page 81).

SAMPLE PADS

REC

1 2 3 4

SVC=001 Frq=LOW Trg=3

>>>> Sampling !!!!! <<<<

Press the SAMPLE PAD to which you are recording to stop recording.

Both the [REC] button and SAMPLE PAD indicators will go out.

NOTES

• Try to stop record immediately after the sound has finished in order

to conserve sample memory and allow maximum total recording

time.

• If the maximum sampling time is exceeded, “Sampling End” will

appear on the display and recording will stop automatically.

• In some cases “SQUEEZING XXX%” will appear on the display

while the PSR-2700 processes the sampled data after recording.

“XXXKByteFree” will then appear, indicating the amount of RAM

remaining after the data has been processed.

SAMPLE PADS

1 2 3 4

XRecord .....................................................................................................................................................

CStop Recording.......................................................................................................................................

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha PSR-1700 Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info