You can adjust the sound output level of the center speaker
even if the output level is already set in “SPEAKER BALANCE
ADJUSTMENT” on page 21.
1 Press the DELAY/CENTER/REAR/SWFR key repeatedly
until “CNTR” appears in the display.
2 By continuously pressing the “+” or “–” side of the LEVEL
button, the level value changes continuously.
Control range: MIN, –20 to +10 dB
Notes
●
This adjustment can be made only when the digital sound
field program PRO LOGIC or PRO LOGIC
ENHANCED is selected, or the “DVD/LD 6CH” input source
mode is selected.
●
Once the output level is adjusted, the level value will be the
same in the PRO LOGIC and PRO LOGIC
ENHANCED programs and the “DVD/LD 6CH” input source
mode.
38
Adjustment of the CENTER LEVEL
Adjustment of the REAR LEVEL
You can adjust the sound output level of the rear speakers
even if the output level is already set in “SPEAKER BALANCE
ADJUSTMENT” on page 21.
1 Press the DELAY/CENTER/REAR/SWFR key repeatedly
until “REAR” appears in the display.
2 By continuously pressing the “+” or “–” side of the LEVEL
button, the level value changes continuously.
Control range: MIN, –20 to +10 dB
Notes
●
This adjustment can be made only when the built-in digital
sound field processor is on, or the “DVD/LD 6CH” input
source mode is selected.
●
Once the output level is adjusted, the level value will be the
same in all the digital sound field programs and the
“DVD/LD 6CH” input source mode.
