Bedienungsanleitung Yamaha RX-V3000RDS (Seite 41 von 78) (Englisch)

549968

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

English

SET MENU Items

1. SPEAKER SET (1A. CENTER SP to 1G. MAIN LEVEL)

Use this feature to select suitable output modes for your speaker configuration. You must set the output mode when you use a subwoofer.

■ 1A. CENTER SP (Center Speaker Mode)

By adding a Center speaker to your speaker configuration, this unit can provide good dialogue localization for many listeners and superior

synchronization of sound and images. The OSD shows a large, small, or no center speaker depending on how you set this item. The initial

setting is “LRG”.

Select the “LRG” (Large) setting if you have a large Center speaker. The entire range of Center channel signals is sent to the Center

speaker.

Select the “SML” (Small) setting if you have a small Center speaker. Center channel low frequency signals of 90 Hz and below are

directed to the speakers selected with the 1E. LFE/BASS OUT item.

Select the “NONE” setting if you do not have a Center speaker. All of the Center channel signals are directed to the left and right

Main speakers. The “NONE” position provides good dialogue localization for the person sitting in the main listening position.

■ 1B. MAIN SP (Main Speaker Mode)

The display shows small or large Main speakers depending on how you set this item. The initial setting is “LARGE”.

Select the “LARGE” setting if you have large Main speakers. The entire range of left and right Main channel signals is directed to the

left and right Main speakers.

Select the “SMALL” setting if you have small Main speakers. The Main channel low frequency signals of 90 Hz and below are

directed to the speakers selected with the 1E. LFE/BASS OUT item.

Note:

• When you select the “MAIN” setting for the 1E. LFE/BASS OUT item, the Main channel low frequency signals of 90 Hz and below are directed to the

Main speakers even if you select the “SMALL” setting for the Main speaker mode.

■ 1C. REAR L/R SP (Rear Speaker Mode)

The OSD shows large, small, or no Rear speakers depending on how you set this item. The initial setting is “LRG”.

Select the “LRG” setting if you have large left and right Rear speakers or if you use a Rear Subwoofer. The entire range of Rear

channel signals is sent to the left and right Rear speakers.

Select the “SML” setting if you have small left and right Rear speakers. Rear channel low frequency signals of 90 Hz and below are

directed to the speakers selected with the 1E. LFE/BASS OUT item.

Select the “NONE” setting if you do not have Rear speakers.

• In this case, the Rear Center speaker will automatically be set to “NONE” and the 1D. REAR CT SP item will be skipped.

1A CENTER SP

“LRG SML NONE

1A CENTER SP

LRG “SML NONE

1A CENTER SP

LRG SML “NONE

1A CENTER SP

“LRG SML NONE

Large Small None

1B MAIN SP

“LARGE SMALL

1B MAIN SP

LARGE “SMALL

1B MAIN SP

“LARGE SMALL

Large Small

1C REAR L/R SP

“LRG SML NONE

1C REAR L/R SP

LRG “SML NONE

1C REAR L/R SP

LRG SML “NONE

1C REAR L/R SP

“LRG SML NONE

Large Small None

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V3000RDS Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info