516915
120
Zoom out
Zoom in
Vorherige Seite
1/166
Nächste Seite
SETUP
Controlling the remote control to operate various functions
En 120
7
Press iENTER to set the number.
“OK” appears in the display window if setting was
successful.
“NG” appears in the display window if the setting was
unsuccessful. In this case, start over from step 3.
8
Press BSETUP again to exit from the setup
menu.
Switching between BD player
linked to scene selections
Press eSCENE and at the same time press
dAV2 and hold it for approximately 3 seconds.
“OK” appears in the display window if setting was
successful.
Then you can operate the external components by
switching the input source to AV2, or selecting AV2 in
the registered scene.
Same steps for operating other external components,
press eSCENE and at the same time press the input
source key selected in step 3 and hold it for
approximately 3 seconds.
Programming from other remote
controls
The remote control of this unit can receive remote
control signals from other remote controls and learn the
remote control operation. If a key on the remote control
does not work after being assigned with an external
component’s function or if the remote control code for
that function is not provided, use this learning feature to
make the function operable with the remote control.
1
Press BSETUP.
“SETUP” appears in the display window.
2
Press iCursor B / C repeatedly to select
“LEARN” and press iENTER.
SETUP
T
U
N.
/CH
2
3
SCENE
1
2
4
ENTER
SOU
R
C
E
R
ECEIVE
R
V
AU
DI
O
4
3
1
7
5
6
V
-A
UX
4
3
1
2
USB
LTI
N
ET
P
H
O
N
O
TUNER
D
OC
K
[ A
]
[ B
]
d
i
e
B
If you continuously want to set up another code for
another control area, repeat steps 4 to 7.
If operation is not possible and the manufacturer of
your component has more than one code, try each of
them until you find the correct one.
NOTES
“ERROR” appears in the display window on the
remote control if you press a button not indicated in
the respective step, or when you press more than one
button simultaneously.
The supplied remote control does not contain all
possible codes for commercially available audio and
video components (including Yamaha components). If
operation is not possible with any of the remote
control codes, program the new remote control
function using the learning feature
(p. 120) or use
the remote control supplied with the component.
Functions programmed using the learning mode take
priority over remote control code functions.
OK
OK
Perform each of the following steps within 30 seconds.
Settings will be automatically stopped if more than
30 seconds passes since the last operation. To reset,
repeat from step 1.
If the remote control of the external component uses
infrared rays, this remote control can learn most of its
functions. The remote control may not recognize
special or consecutive signals.
The keys may not operate the assigned functions
depending on operating conditions of this unit.
Continues to the
next page
120

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha RX-V3067 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha RX-V3067

Yamaha RX-V3067 Bedienungsanleitung - Deutsch - 166 seiten

Yamaha RX-V3067 Kurzanleitung - Deutsch - 8 seiten

Yamaha RX-V3067 Kurzanleitung - Englisch - 8 seiten

Yamaha RX-V3067 Kurzanleitung - Holländisch - 8 seiten

Yamaha RX-V3067 Bedienungsanleitung - Holländisch - 166 seiten

Yamaha RX-V3067 Bedienungsanleitung - Französisch - 166 seiten

Yamaha RX-V3067 Kurzanleitung - Französisch - 8 seiten

Yamaha RX-V3067 Bedienungsanleitung - Italienisch - 166 seiten

Yamaha RX-V3067 Kurzanleitung - Italienisch - 8 seiten

Yamaha RX-V3067 Bedienungsanleitung - Spanisch - 166 seiten

Yamaha RX-V3067 Kurzanleitung - Spanisch - 8 seiten

Yamaha RX-V3067 Kurzanleitung - Schwedisch - 8 seiten

Yamaha RX-V3067 Bedienungsanleitung - Schwedisch - 166 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info