516915
122
Zoom out
Zoom in
Vorherige Seite
1/166
Nächste Seite
SETUP
Controlling the remote control to operate various functions
En 122
7
Press BSETUP again to exit from the setup
menu.
Changing source names in the
display window
The name of the control area (input source) that appears
in the display window on the remote control can be
changed.
1
Press BSETUP.
“SETUP” appears in the display window.
2
Press iCursor B / C repeatedly to select
“RENAME” and press iENTER.
3
Press dInput selector or eSCENE to select
the desired control area.
4
Edit the name of the control area.
To locate the position to edit, press iCursor D / E.
To select a character, press
iCursor B / C.
5
Press iENTER to set the new name.
“OK” appears in the display window on the remote
control if renaming was successful.
6
Press BSETUP again to exit from the setup
menu.
ZONE
SETUP
T
U
N.
/CH
2
3
AV
AUDIO
SCENE
1
4
4
31
2
75
6
V-AUX
4
31
2
USB
MULTI
NET
PHONO
TUNER
DOCK
4
ENTER
[ A ]
[ B ]
R
E
R
ECEIVE
R
d
k
i
e
B
C
l
NOTES
“ERROR” appears in the display window on the
remote control if you press a button not indicated in
the respective step, or when you press more than one
button simultaneously.
This remote control can learn approximately 200
functions. However, depending on the signals learned,
“FULL” may appear in the display before you
program 200 functions. In this case, clear unnecessary
programmed functions to make room for further
learning (
p. 125).
Learning may not be possible in the following cases:
when the batteries in the remote control for this unit
or other components are weak.
when the remote control is exposed to direct
sunlight.
when the function to be programmed is continuous
or uncommon.
Press iCursor B to change the character in the
following order, or press iCursor C to go in the
reverse order: A to Z, a to z, 0 to 9, space, symbols (-,
+, /, :).
When you want to rename the another control area,
press
dInput selector to select the desired control
area and then press
iENTER and then carry out the
operations of steps 4 to 5.
Press
lRECEIVER A to rename the control area for
the receiver.
Press
kA to rename the control area for TV monitor.
Press
eSCENE key to rename the control area for the
scenes. When rename the control area for the scenes of
each zone, press
CZONE to select a zone before
step 1.
NOTE
“ERROR” appears in the display window on the
remote control if you press a button not indicated in
the respective step, or when you press more than one
button simultaneously.
122

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha RX-V3067 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha RX-V3067

Yamaha RX-V3067 Bedienungsanleitung - Deutsch - 166 seiten

Yamaha RX-V3067 Kurzanleitung - Deutsch - 8 seiten

Yamaha RX-V3067 Kurzanleitung - Englisch - 8 seiten

Yamaha RX-V3067 Kurzanleitung - Holländisch - 8 seiten

Yamaha RX-V3067 Bedienungsanleitung - Holländisch - 166 seiten

Yamaha RX-V3067 Bedienungsanleitung - Französisch - 166 seiten

Yamaha RX-V3067 Kurzanleitung - Französisch - 8 seiten

Yamaha RX-V3067 Bedienungsanleitung - Italienisch - 166 seiten

Yamaha RX-V3067 Kurzanleitung - Italienisch - 8 seiten

Yamaha RX-V3067 Bedienungsanleitung - Spanisch - 166 seiten

Yamaha RX-V3067 Kurzanleitung - Spanisch - 8 seiten

Yamaha RX-V3067 Kurzanleitung - Schwedisch - 8 seiten

Yamaha RX-V3067 Bedienungsanleitung - Schwedisch - 166 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info