516915
124
Zoom out
Zoom in
Vorherige Seite
1/166
Nächste Seite
SETUP
Controlling the remote control to operate various functions
En 124
5
Press the buttons for the functions you
want to include in the macro operation in
sequence.
Press mSOURCE/RECEIVER to switch the
controlled component.
Example
Set the input source to AV2 Turn on the DVD player
Turn on the video monitor
Step 1 (“MACRO1”): Press
dAV2.
Step 2 (“MACRO2”): Press
mSOURCE/RECEIVER
repeatedly to select the controlled component until
MACRO2 and AV2 alternately appear in the display.
And then, press
bSOURCE A.
Step 3 (“MACRO3”): Press
kA.
6
Press iENTER for 3 seconds or longer to
confirm the program.
You can set up to 10 steps (10 functions). After you
have set 10 steps, “FULL” appears.
7
Press BSETUP again to exit from the setup
menu.
Clearing configurations
Clear all changes made in each function set, such as
learned functions, macros, renamed control area names
and setup remote control ID.
Clearing function sets
1
Press BSETUP.
“SETUP” appears in the display window.
2
Press iCursor B / C repeatedly to select
“CLEAR” and press iENTER.
3
Press iCursor B / C repeatedly to select
the operations that you want to and press
iENTER.
Operations assigned to the following modes can be
cleared.
4
Press dInput selector, lRECEIVER A or
kA to select the desired clear mode. J1
5
Press and hold iENTER for about
3 seconds.
When the clearing is successful, “OK” appears in the
display window.
6
Press BSETUP again to exit from the setup
mode.
ZONE
SETUP
2
3
SOURCE
RECEIVER
AV
AUDIO
SCENE
1
4
4
31
2
75
6
V-AUX
4
31
2
USB
MULTI
NET
PHONO
TUNER
DOCK
4
ENTER
[ A ]
[ B ]
T
U
N.
/C
H
d
l
i
k
B
e
b
m
C
NOTE
“ERROR” appears in the display window if you press
more than one button simultaneously.
Operation modes
LEARN, PRESET, RENAME, MACRO, RESET
“ALL” mode is set at first. When no mode is selected
in this step, the settings of all modes are cleared.
The other keys are used for the following operation
modes.
“RENAME”:
eSCENE key J2
“MACRO”: Macro button (
lRECEIVER A or
dInput selector)
NOTES
“NG” appears in the display window if clearing was
unsuccessful.
“ERROR” appears in the display window if you press
a button not indicated in the respective step, or if you
press more than one button simultaneously.
J
1 : “RESET” initializes the settings of all modes. When selecting
“RESET” in step 2, you cannot select the clear mode in step 4.
J
2 : To clear the rename of each zone, press CZONE to select the
desired zone before step 1.
124

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha RX-V3067 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha RX-V3067

Yamaha RX-V3067 Bedienungsanleitung - Deutsch - 166 seiten

Yamaha RX-V3067 Kurzanleitung - Deutsch - 8 seiten

Yamaha RX-V3067 Kurzanleitung - Englisch - 8 seiten

Yamaha RX-V3067 Kurzanleitung - Holländisch - 8 seiten

Yamaha RX-V3067 Bedienungsanleitung - Holländisch - 166 seiten

Yamaha RX-V3067 Bedienungsanleitung - Französisch - 166 seiten

Yamaha RX-V3067 Kurzanleitung - Französisch - 8 seiten

Yamaha RX-V3067 Bedienungsanleitung - Italienisch - 166 seiten

Yamaha RX-V3067 Kurzanleitung - Italienisch - 8 seiten

Yamaha RX-V3067 Bedienungsanleitung - Spanisch - 166 seiten

Yamaha RX-V3067 Kurzanleitung - Spanisch - 8 seiten

Yamaha RX-V3067 Kurzanleitung - Schwedisch - 8 seiten

Yamaha RX-V3067 Bedienungsanleitung - Schwedisch - 166 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info