Bedienungsanleitung Yamaha RX-V565 (Seite 50 von 332) (Deutsch, Englisch, Holländisch, Französisch, Schwedisch)

464173

Zoom out

Zoom in

Vorherige Seite

1/332

Nächste Seite

46 En

You can control external components for a selected input source with the remote control. The keys available for

controlling external components are as follows:

dSOURCE POWER

Turns on and off an external component.

nCursor, ENTER, RETURN

Operates the menus of external components.

pDISPLAY

Switches between the screens of external components.

rExternal component operation keys

Function as a recording or playback key of an external

component, or a menu display key.

sNumeric keys

Function as numeric keys of an external component.

tTV control keys

• You need to set the remote control code first to control external

components.

• The remote control keys for controlling external components are

available only when the external components have corresponding control

keys.

The following remote control codes are assigned to input

sources as factory default settings. For a complete list of

available remote control codes, refer to “List of remote

control codes” at the end of this manual.

■ Default remote control code settings

“—” indicates no assignment

• An external component that is controlled by the remote control can be

automatically selected according to selection of the scenes (see page 21).

You can control other components by setting the

appropriate remote control codes. For a complete list of

available remote control codes, refer to “List of remote

control codes” at the end of this manual.

1 Press cCODE SET on the remote control

using a pointed object such as the tip of a

ballpoint pen.

bTRANSMIT on the remote control blinks twice.

2 Press gInput selection keys.

3 Enter a remote control code using

sNumeric keys.

Once the remote control code is registered,

bTRANSMIT on the remote control blinks twice.

If it fails, bTRANSMIT blinks six times. Repeat

from step 1.

You can clear all the remote control codes previously set,

and reset all of them to the initial factory settings.

1 Press cCODE SET on the remote control

using a pointed object such as a tip of a

ballpoint pen.

bTRANSMIT on the remote control blinks twice.

2 Press lSETUP on the remote control.

3 Enter “9981” using sNumeric keys.

Once the initialization is complete, bTRANSMIT

on the remote control blinks twice. If it fails,

bTRANSMIT blinks six times. Repeat from

step 1.

Controlling other components with the remote control

INPUT Switches visual inputs of TV

MUTE Mute audio of TV

TV VOL +/– Controls the volume of TV

TV CH +/– Switches channels of TV

POWER Turns on and off TV

Input source Category Manufacturer

Default

code

[HDMI1] Blu-ray Disc Yamaha 2018

[HDMI2] — — —

[HDMI3] — — —

[HDMI4] — — —

[AV1] ———

[AV2] ———

[AV3] CD Yamaha 5013

[AV4] ———

[AV5] ———

[AV6] ———

[AUDIO1] — — —

[AUDIO2] — — —

[V-AUX] — — —

[TUNER] Tuner Yamaha 5007

[DOCK] DOCK Yamaha 5011

[A]/[B] — — —

Setting remote control codes

Resetting all remote control codes

Input source Category Manufacturer

Default

code

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V565 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V565

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info