Bedienungsanleitung Yamaha RX-V595a (Seite 43 von 63) (Englisch, Französisch)

458065

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

English

You can use the remote control to control not only this unit but also other components connected to it. The remote control is factory

set to control this unit and most YAMAHA audio components.

To control other brands of components, you must preset the remote control with the manufacturers’ codes listed from

page 105.

2 Press the desired operation button.

Note: Press the button with the remote control aimed at

the front panel.

REMOTE CONTROL

Basic operation

1 Select the position for the component that you want to

control by turning the SELECTOR DIAL.

Note: Turn the SELECTOR DIAL until it stops with a click.

Components which can be controlled

There are nine positions that you can select to control connected components with this remote control. When turning the

SELECTOR DIAL, the position changes as follows:

SELECTOR

DIAL

Notes

1. The shaded positions in the diagram above indicate that you can preset the code for the manufacturer of your component.

Note that you can preset only one code for one position. (See “SETUP CODES” on page 49 for details).

2. DVD/LD and DVD MENU positions:

• Be sure that the SELECTOR DIAL is set to the DVD/LD position before presetting the code for a DVD or an LD player. The

code that you preset to the DVD/LD position is also simultaneously preset to the DVD MENU position. You cannot preset the

code for a DVD player when the SELECTOR DIAL is set to the DVD MENU position.

• DVD MENU operations cannot be performed for some DVD players.

3. When using a second (and third) VCR (See “To use a second (and third) VCR” on page 49 for details.):

• If you are not using a CBL/DBS (cable TV or DBS tuner), the second (or third) VCR can be preset by using the CBL/DBS

position.

• If you are not using a DVD player, the second (or third) VCR can be preset by using the DVD MENU position. Note that in

this case you must preset the code for an LD player to the DVD/LD position even if an LD player is not being used.

4. The button functions on the remote control differ depending on the position selected by the SELECTOR DIAL. Refer to the

following pages for details.

DVD/LD & DVD MENU:

An LD player can be controlled by using the DVD/LD position.

A DVD player can be controlled by using the DVD/LD and

DVD MENU positions. The code for a YAMAHA DVD player is

preset. If the remote control will not operate your YAMAHA

DVD player, you need to preset code number “4490.”

AMP/TUN:

You can perform the basic

operations of this unit with the

SELECTOR DIAL set to this

position.

TAPE/MD:

The code for a YAMAHA tape deck is preset.

(Be sure to preset the proper code when operating a YAMAHA

MD recorder.)

CD:

The code for a YAMAHA CD player is preset.

DSP:

This unit can be controlled and DSP programs can be selected

directly.

VCR:

A VCR can be controlled.

CBL/DBS:

A cable television or

DBS tuner can be

controlled.

TV:

A television can be

controlled.

Indicator

The indicator will flash when the button is

pressed.

The position name is displayed

in this window.

01RX-V595a-e/f6 6/24/99, 11:45 AM43

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V595a Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info