Bedienungsanleitung Yamaha RX-V661 (Seite 74 von 109) (Englisch)

464163

Zoom out

Zoom in

Vorherige Seite

1/109

Nächste Seite

72 En

Customizing this unit (MANUAL SETUP)

LFE/Bass out LFE/BASS OUT

Use this feature to select the speakers that output the LFE

(low-frequency effect) and the low-frequency signals.

Choices: SWFR, FRNT, BOTH

When a subwoofer is connected to this unit

and you want to get natural bass sound

Select “SWFR” (subwoofer). The LFE signals as well

as the low-frequency signals of other speakers set to

“SML” (or “SMALL”) are directed to the subwoofer.

When a subwoofer is connected to this unit

and you want to get rich bass sound

Select “BOTH” (both). The low-frequency signals of

any source are output from the subwoofer. The LFE

signals as well as the low-frequency signals of other

speakers set to “SML” (or “SMALL”) are directed to

the subwoofer. The low-frequency signals of the front

left and right channels are directed to the front left and

right speakers and the subwoofer regardless of the

“FRONT SP” setting.

When you do not use a subwoofer

Select “FRNT” (front). The LFE signals, the

low-frequency signals of the front left and right

channels, and the low-frequency signals of other

speakers set to “SML” (or “SMALL”) are all directed

to the front left and right speakers regardless of the

“FRONT SP” setting.

Bass crossover CROSSOVER

Use this feature to select the crossover frequency of all the

speakers set to “SML” (or “SMALL”) or to “NONE” in

“SPEAKER SET” (see page 71). All frequencies below

the selected frequency will be sent to the subwoofer or to

the speakers set to “LRG” (or “LARGE”) in “SPEAKER

SET” (see page 71).

Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,

120Hz, 160Hz, 200Hz

Subwoofer phase SUBWOOFER PHASE

Use this feature to switch the phase of your subwoofer if

bass sounds are lacking or unclear.

Choices: NORMAL, REVERSE

• Select “NORMAL” if you do not want to reverse the

phase of your subwoofer.

• Select “REVERSE” to reverse the phase of your

subwoofer.

■ Speaker level B)SPEAKER LEVEL

Use this feature to manually adjust the output level of each

speaker.

Control range: –10.0 to +10.0 dB

Control step: 0.5 dB

Initial setting: 0.0 dB

• The available speaker channels differ depending on the setting

of the speakers.

• Instead of “SBL” and “SBR”, “SB” is displayed if “SUR. B L/R

SP” is set to either “SMLx1” or “LRGx1” (see page 71).

SOUND MENU

LFE/BASS OUT

SWFR FRNT>BOTH

SOUND MENU

CROSSOVER

FREQ;;;80Hz

SPEAKER LEVEL Adjusted speaker

Front left speaker

Front right speaker

Center speaker

SWFR

Subwoofer

Surround left speaker

Surround right speaker

SBR

Surround back right speaker

SBL

Surround back left speaker

Presence left speaker

Presence right speaker

Notes

SOUND MENU

SUBWOOFER PHASE

>NORMAL REVERSE

SOUND MENU

B)SPEAKER LEVEL 1/2

__________

. FL;;;;;;;;;;

FR;;;;;;;;;;

C;;;;;;;;;;

SWFR;;;;;;;;;;

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V661 Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V661

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info