Bedienungsanleitung Yamaha RX-V661 (Seite 75 von 109) (Englisch)

464163

Zoom out

Zoom in

Vorherige Seite

1/109

Nächste Seite

73 En

Customizing this unit (MANUAL SETUP)

ADVANCED

OPERATION

English

■ Speaker distance C)SP DISTANCE

Use this feature to manually adjust the distance of each

speaker and the delay applied to the respective channel.

Ideally, each speaker should be the same distance from the

main listening position. However, this is not possible in

most home situations. Thus, a certain amount of delay

must be applied to the sound from each speaker so that all

sounds will arrive at the listening position at the same

time.

Unit UNIT

Choices: meters (m), feet (ft)

Initial setting:

[U.S.A. and Canada models]: feet (ft)

[Other models]: meters (m)

• Select “meters” to adjust speaker distances in meters.

• Select “feet” to adjust speaker distances in feet.

Speaker distances

Control range: 0.30 to 24.00 m (1.0 to 80.0 ft)

Control step: 0.10 m (0.5 ft)

Initial setting:

FRONT L/FRONT R/CENTER/SWFR/SUR. L/SUR. R/

PRNS L/PRNS R: 3.00 m (10.0 ft)

SB L/SB R: 2.10 m (7.0 ft)

• The available speaker channels differ depending on the setting

of the speakers.

• Instead of “SB L” and “SB R”, “SB” is displayed if “SUR. B L/

R SP” is set to either “SMLx1” or “LRGx1” (see page 71).

■ Equalizer D)EQUALIZER

Use this feature to select the parametric equalizer or the

graphic equalizer.

Equalizer type select EQ TYPE SELECT

Use this feature to select the type of equalizer.

Choices: AUTO PEQ, CENTER GEQ, EQ OFF

• Select “AUTO PEQ” to use the parametric equalizer

adjusted in “AUTO SETUP” (see page 28).

• Select “CENTER GEQ” to adjust the built-in

5-frequency band graphic equalizer so that the tonal

quality of the center speaker matches that of the front

left and right speakers. Press

k / n to display the

graphic equalizer screen.

• Select “EQ OFF” to deactivate the equalizing feature.

When you carry out “AUTO SETUP” in advance (see page 28),

“AUTO PEQ” is automatically selected as the default setting.

Test tone TEST

Use this feature to make adjustments for “CENTER GEQ”

while listening to a test tone.

Choices: OFF, ON

• Select “OFF” to stop test tones and output the currently

selected source component.

• Select “ON” to output test tones from the center and

front left speakers.

SP DISTANCE Adjusted speaker

FRONT L

Front left speaker

FRONT R

Front right speaker

CENTER

Center speaker

SWFR

Subwoofer

SUR. L

Surround left speaker

SUR. R

Surround right speaker

SB L

Surround back left speaker

SB R

Surround back right speaker

PRNS L

Presence left speaker

PRNS R

Presence right speaker

Notes

SOUND MENU

C)SP DISTANCE 1/2

. UNIT;;;;;;meters

FRONT L;;;3.00m

FRONT R;;;3.00m

CENTER;;;;3.00m

SWFR;;;;;;3.00m

[ ]/[ ]:Up/Down

[ ]/[ ]:Adjust

[

Note

SOUND MENU

D)EQUALIZER

EQ TYPE SELECT

. CENTER GEQ

[ ]/[]:CT GEQ

[ ]/[ ]:Select

[

SOUND MENU

. TEST >OFF ON

______

100Hz ;;;;;; 0dB

300Hz ;;;;;; 0dB

1kHz ;;;;;; 0dB

3kHz ;;;;;; 0dB

10kHz ;;;;;; 0dB

[ ]/[ ]:Up/Down

[

[ ]/[ ]:Adjust

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V661 Seite 75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V661

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info