Bedienungsanleitung Yamaha S03SL (Seite 40 von 112) (Englisch)

588954

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

Basics Section

9Use the [▲] and [▼] buttons to call up the NtLmt

(Note Limit) and VelLmt (Velocity Limit) settings,

and check whether or not the Part of the piano

Voice is set appropriately — in other words, make

sure that the Note or Velocity settings do not

prevent the Voice from being played normally.

Except in special cases, you should generally avoid

setting limits on the note and velocity ranges, in

order to ensure that notes are sounded properly and

are not cut off.

By following steps 3 to 9 above, when you play

back a song ﬁle in the sequencer, the piano track is

transmitted through MIDI channel 2. The MIDI

data is received by the S03 which then plays the

Voice for the Part assigned to MIDI channel 2.

)Repeat steps 3 to 9 above, but set up Part 3 for

bass and to receive on MIDI channel 3.

!Repeat steps 3 to 9 again, setting up Part 10 for

drums and to receive on MIDI channel 10.

nTo avoid situations where the Voices of unused Parts

are suddenly played back, you should set the MIDI

receive channels for unused Parts to “off.”

nThere are many other Part-speciﬁc parameters in the

Multi Edit mode. For details, see page 55.

@Before exiting Multi Edit Mode, you need to store

the settings for the Multi. For details about storing

Multis, see page 69.

Now, when you select this Multi in the Multi Play

mode, you can play back the song ﬁle on computer

(sequencer), and the piano, bass and drum Parts will be

played back according to each track’s MIDI channel.

Performing Live

While Playing

Back a Song File

While playing back the song ﬁle with the piano, bass

and drum Parts assigned earlier, you can set up the

Multi so that you can also play another Part live.

This is the same as the Multi created earlier (page 38),

but with the addition of another Part for live playback.

Be careful to make the following important settings.

• In the Multi created earlier, Parts 2, 3 and 10 were

being used. As an example, we will now assign

another Part (Part 1) to a solo-type Voice and set the

MIDI Receive Channel to 1.

•At the Trans Ch (PAGE 4) screen in MIDI Mode,

set the MIDI Receive Channel to 1.

The Voice for Part 1 can now be played live using

the keyboard.

nBecause the S03 features a fully-compatible XG tone

generator, you can play any of the wide variety of

commercially available XG/GM song software. This

ensures broad dynamic and expressive range, with a wide

variety of rich instrument sounds and effects. You can

also mute speciﬁc parts of the MIDI data — allowing you

to practice the missing parts yourself, or to use the song

data as instrumental backing for your own singing and

playing.

KEYELEMPART

OCTAVE

PAG E

4 P 2

NtLmt-L

C-2 Track 1

Track 2

Track 3

Piano

Bass

Drums

Transmit Ch.2

Transmit Ch.3

Transmit Ch.10

Part 1

Part 2

Part 3

Solo-type Voice

Piano Voice

Bass Voice

Receive Ch.1

Receive Ch.2

Receive Ch.3

Part 10

Drums Voice

Receive Ch.10

Song File

Multi

Playback using

keyboard

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha S03SL Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha S03SL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info