Bedienungsanleitung Yamaha S08 (Seite 76 von 88) (Englisch)

586916

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Basics Section Quick Guide Reference Appendix

About MIDI

SYSTEM MESSAGES

System messages are the data related to the overall

system of the device.

■

System Exclusive Messages

System Exclusive messages control various functions of

the S08, including master volume and master tuning,

tone generator mode, effect type and various other

parameters.

General MIDI (GM) System On

When “General MIDI system on” is received, the tone

generator mode will be changed to XG (Multi) mode.

When this happens, the S08 will receive the MIDI

messages which are compatible with GM System Level 1,

and consequently will not receive NRPN and Bank Select

messages.

F0 7E 7F 09 01 F7 (Hexadecimal)

n Make sure that the interval between this message and

the ﬁrst note data of the song is at least a quarter note

or greater in length.

GM2 System On

When a “GM2 System on” message is received, the tone

generator mode changes to XG (Multi) mode. When this

happens, the S08 is set to receive the MIDI messages

which are compatible with GM System Level 2.

F0 7E 7F 09 03 F7 (Hexadecimal)

n Make sure that the interval between this message and

the ﬁrst note data of the song is at least a quarter note

or greater in length.

GM System Off

When a “GM System off” message is received, the tone

generator mode changes to a mode other than GM/GM2

mode. The S08 performs the same function as when an

“XG System on” message is received.

F0 7E 7F 09 02 F7 (Hexadecimal)

n Make sure that the interval between this message and

the ﬁrst note data of the song is at least a quarter note

or greater in length.

Master Volume

When received, the Volume MSB will be effective for the

System Parameter.

F0 7F 7F 04 01 ll mm F7 (Hexadecimal)

* mm(MSB) = appropriate volume value, ll(LSB) =

ignored

XG System On

When this data is received, the S08 will switch to XG

(Multi) mode and all the parameters will be initialized

accordingly, and XG-compatible messages such as NRPN

and Bank Select messages can be received.

F0 43 1n 4C 00 00 7E 00 F7 (Hexadecimal)

*n = device number (normally set to “0”)

n Make sure that the interval between this message and

the ﬁrst note data of the song is at least a quarter note

or greater in length.

Multi Mode On

F0 43 1n 6C 0A 00 00 01 F7 (Hexadecimal)

*n = device number (normally set to “0”)

n There are some operating conditions in which the

S08 does not respond to MIDI data, such as when

using the Compare function or when in the Demo

mode.

■ System Realtime Messages

Active Sensing (Receive only)

Once FEH (Active Sensing) has been received, if no MIDI

data is subsequently received for longer than an interval

of approximately 300msec, the S08 will perform the same

function as when All Sounds Off, All Notes Off, and

Reset All Controllers messages are received, and will then

return to a status in which FEH is not monitored.

n Refer to the MIDI Data Format in the “Data List” book

for more information on the various messages.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha S08 Seite 76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha S08

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info