Bedienungsanleitung Yamaha S08 (Seite 74 von 88) (Englisch)

586916

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Basics Section Quick Guide Reference Appendix

About MIDI

Release Time (Control #072)

Messages which adjust the AEG release time set for each

Part.

The value set here is an offset value which will be added

to or subtracted from the voice data.

Attack Time (Control #073)

Messages which adjust the AEG attack time set for each

Part.

The value set here is an offset value which will be added

to or subtracted from the voice data.

Brightness (Control #074)

Messages which adjust the ﬁlter cutoff frequency set for

each Part.

The value set here is an offset value which will be added

to or subtracted from the voice data.

Lower values will result in a softer sound.

Depending on the voice, the effective range may be

narrower than the range available for adjustment.

Decay Time (Control #075)

Messages which adjust the AEG decay time set for each

Part. The value set here is an offset value which will be

added to or subtracted from the voice data.

Vibrato Rate (Control #076)

Messages which adjust the vibrato rate set for each Part.

The value set here is an offset value which will be added

to or subtracted from the voice data.

Vibrato Depth (Control #077)

Messages which adjust the vibrato depth set for each Part.

The value set here is an offset value which will be added

to or subtracted from the voice data.

Vibrato Delay Time (Control #078)

Messages which adjust the vibrato delay time set for each

Part. The value set here is an offset value which will be

added to or subtracted from the voice data.

Portamento Control (Control #084)

Messages which apply a portamento between the

currently-sounding note and the subsequent note.

Portamento Control is transmitted specifying the note-on

key of the currently-sounding note.

Specify a Portamento Source Key number between 0 - 127.

When a Portamento Control message is received, the

currently sounding pitch will change with a Portamento

Time of 0 to the next note-on key on the same channel.

For example, the following settings would apply a

portamento from note C3 to C4.

90H 3CH 7FH ......... C3 Note on

B0H 54H 3CH......... Source key number set to C3

90H 48H 7FH.......... C4 Note on (When C4 is on, C3 is

raised by a portamento to C4.)

Effect1 Depth (Reverb Send Level)

(Control #091)

Messages which adjust the send level for the Reverb effect.

Effect3 Depth (Chorus Send Level)

(Control #093)

Messages which adjust the send level for the Chorus effect.

Effect4 Depth (Variation Effect Send Level)

(Control #094)

Messages which adjust the send level for the Variation

effect.

If Variation effect uses System effect, this message sets

the send level for the Variation effect. If it uses Insertion

effect, this setting is invalid.

Data Increment (Control #096)

Decrement (Control #097) for RPN

Messages which increase or decrease the MSB value of

pitch bend sensitivity, ﬁne tune, or coarse tune in steps of

1. You are required to assign one of those parameters

using the RPN in the external device in advance.

The data byte is ignored.

When the maximum value or minimum value is reached,

the value will not be incremented or decremented further.

(Incrementing the ﬁne tune will not cause the coarse

tune to be incremented.)

NRPN (Non-Registered Parameter Number)

LSB (Control #098)

NRPN (Non-Registered Parameter Number)

MSB (Control #099)

Messages which adjust a voice’s vibrato, ﬁlter, EG, drum

setup or other parameter settings.

First send the NRPN MSB and NRPN LSB to specify the

parameter which is to be controlled. Then use Data Entry

(page 73) to set the value of the speciﬁed parameter.

Note that once the NRPN has been set for a channel,

subsequent data entry will be recognized as the same

NRPN’s value change. Therefore, after you use the

NRPN, you should set a Null (7FH, 7FH) value to avoid

an unexpected result.

The following NRPN numbers can be received.

*rr=Note number for each drum voice instrument.

PARAMETER

Vibrato Rate

Vibrato Depth

Vibrato Delay

Filter Cutoff Frequency

Filter Resonance

EG Attack Time

EG Decay Time

EG Release Time

Drum Filter Cutoff Frequency

Drum Filter Resonance

Drum EG Attack Rate

Drum EG Decay Rate

Drum Instrument Pitch Coarse

Drum Instrument Pitch Fine

Drum Instrument Level

Drum Instrument Panpot

Drum Instrument Reverb Send Level

Drum Instrument Chorus Send Level

Drum Instrument Variation Send Level

NRPN MSB NRPN LSB

01 08

01 09

01 0A

01 20

01 21

01 63

01 64

01 66

14 rr

15 rr

16 rr

17 rr

18 rr

19 rr

1A rr

1C rr

1D rr

1E rr

1F rr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha S08 Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha S08

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info