Bedienungsanleitung Yamaha S30 (Seite 137 von 156) (Englisch)

586917

137

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

137

Card Mode

Card Mode Operations

1Insert the Memory Card into the CARD slot.

2Press the [CARD] key to enter Card Mode.

3Use the [PAGE] knob to switch to the screen for the

operation you wish to perform.

In the first “Status” screen, you don’t need any further

operation described in step 2 and after.

4Use Knobs [B], [C], [1] and [2] to set each parameter.

Alternatively, you can use the [DATA] knob and the

[DEC/NO] and [INC/YES] keys.

To save, load, rename or delete a file, use Knob [B] to

select the File Type and Knob [C] to select the File

Number.

File Directories

Directories are denoted by “DIR” next to the

directory name. To open a directory, use Knob [C]

to move the cursor to it and press the [ENTER] key.

All the files in the directory are displayed. If you

select File Number 000, “up dir” will be displayed.

By pressing the [ENTER] key, you will be returned

to the parent directory (i.e., moved up one directory

level).

When saving or renameing, the directory for the

currently selected file is displayed if you press the

[SHIFT] key.

5When you press the [ENTER] key, you will see a

confirmation message.

6Press the [INC/YES] key to execute the operation.

The message “Completed.” will be displayed after it

has executed, and you will be returned to the

previous screen.

The operation will be canceled if you press the

[DEC/NO] key during execution.

If the operation takes some time to execute, you will see

the message “Executing...” If you switch the power off

in this state, the data may be damaged.

The steps in the procedure may vary slightly, depending

on the operation being performed. Refer to the

explanation of each operation for details.

Load) Type File:/VOICEDIR/SUBDIR-1/

<< Are you sure? [YES]/[NO] >>

SHIFT PAGE

PART

ELEMENT

DATAA B C 1 2

Save) Type File A-? Cursor

Card all ***[NEWFILE .S2A]

Status

You can view the amount of free and used on the

Memory Card. There are no settings.

■Used

Shows the amount of Memory Card memory used.

The amount is shown as a percentage in parentheses.

■Free

Shows the amount of free memory on the Memory

Card.

Save

You can save files to Memory Card as follows.

■Type (File Type)

❏Settings: all (all data), all-voice, chain (Sequence Chain),

plugin

Details about each File Type are given on Page 136.

The Memory Card must be formatted before you can

save data to it (Page 140).

1Use Knob [B] to select the File Type to which the

data will be saved.

2To overwrite an existing file, use Knob [C] to select

the File Number.

To save a file with a new name, use Knob [2] to

move the cursor. Then use Knob [1] or the [DATA]

knob or [DEC/NO] and [INC/YES] keys to enter the

new file name (see next Page).

If you press the [SHIFT] key, the directory for the

currently selected file is displayed. Further details are

given in the section “Card Mode Operations”.

3When you press the [ENTER] key, the file will be

saved. If an existing file will be overwritten when

saving, a confirmation message will be displayed and

the following step will be necessary.

Save) Type File:/VOICEDIR/SUBDIR-1/

Card all 001[NEWFILE .S2A]

Data to be saved

(File Type) File number of

file to be saved New file name

Status) Used Free

Card 2.9MB(70%) 1.1MB

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha S30 Seite 137

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha S30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info