Bedienungsanleitung Yamaha YSP-3300 (Seite 23 von 82) (Englisch)

516956

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

Initial settings

23 En

PREPARATION PLAYBACK SETTINGS

TROUBLESHOOTING

APPENDIX

Due to differences in room sizes and shapes, positioning of this

unit, and the lifestyle of users, settings for each channel must be

adjusted in order for this unit to provide the optimal listening

experience.

This unit is equipped with IntelliBeam, which automatically

adjusts settings for each channel. IntelliBeam offers two features,

“beam optimization” and “sound optimization”.

Beam optimization:

This feature optimizes the beam angle so that the parameter best

matches your listening environment.

Sound optimization:

This feature optimizes the beam delay, volume, and quality so

that the parameters best match your listening environment.

This unit performs these two automatic optimizations with the aid

of the supplied IntelliBeam microphone.

Make sure that there are no obstacles between the IntelliBeam

microphone and the walls in your listening room as these objects

obstruct the path of sound beams.

However, any objects that are in contact with the walls will be

regarded as a protruding part of the walls.

Auto setup for appropriate

surround effects (IntelliBeam)

Installing the IntelliBeam microphone

Place the IntelliBeam microphone at your

normal listening position.

• Use the supplied cardboard microphone stand or a tripod to

place the IntelliBeam microphone at the same height as your

ears would be when you are seated.

• Position the IntelliBeam microphone so that it is parallel with

the floor.

• The AUTO SETUP procedure may not be run successfully if this

unit is installed in one of the rooms described in “Conditions that

make it difficult for sound beams to achieve surround sound” on

page 11. The My Surround function can be used to enjoy rich

surround sound in these types of rooms as well. See “Changing

the audio output method for surround playback” (☞ p. 36, 37) for

more information.

• Do not connect the IntelliBeam microphone to an extension

cable as doing so may result in an inaccurate sound optimization.

• After you have completed the AUTO SETUP procedure, be sure

to disconnect the IntelliBeam microphone.

• The IntelliBeam microphone is sensitive to heat.

– Keep the IntelliBeam microphone away from direct sunlight.

– Do not place the IntelliBeam microphone on top of this unit.

Notes

Assembling the supplied cardboard

microphone stand

123

Remove

Fit in

Run through

Place

horizontally

Fit in

IntelliBeam microphone Upper limit

Within 1 m

Center height of

this unit

Cardboard

microphone stand

Within 1 m

Listening

position

1.8 m or more

Lower limit

Center line

IntelliBeam

microphone

Cardboard microphone stand

• “BEAM+SOUND OPTIMIZE” screen appears automatically when

the IntelliBeam microphone is connected. “BEAM OPTIMIZE

ONLY” or “SOUND OPTIMIZE ONLY” can be selected separately

in the setup menu (☞p. 26).

• Up to three sets of automatically configured settings can be stored in

this unit’s memory (☞p. 28). You can save the several data depending

on listening room and you can change the setting conveniently.

2) y

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha YSP-3300 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha YSP-3300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info