Bedienungsanleitung Yamaha YSP-3300 (Seite 33 von 82) (Englisch)

516956

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

33 En

Playback features

PREPARATION PLAYBACK SETTINGS

TROUBLESHOOTING

APPENDIX

This unit supports the following capabilities to enjoy sound based

on your preference.

• Switching between surround playback, stereo playback, and

target playback modes

• Compressed Music Enhancer

• Volume adjustment for each channel

•CINEMA DSP

• Switching between surround audio output methods

• Surround sound decoder

Stereo playback mode

Press the STEREO key to switch between standard stereo and

beam stereo playback modes.

When “STEREO” is selected, the front channels are the primary

channel sources for output of stereo sound.

When “BM STEREO” is selected, left and right channel sounds

are output as sound beams from the front left and right channels.

This expands the area to which sound is output.

Surround playback mode

Surround sound is output as sound beams. See page 36 for

instructions on switching between the sound beam output

methods.

Target playback mode

Target playback mode focuses sounds from all channels as sound

beams from a single channel to achieve optimal listening for a

specified listener. See page 39 for more information.

Play back digitally compressed format such as MP3 and WMA,

with emphasis on bass and treble for extended dynamic sounds.

Press the key again to turn the function off.

Volume for each channel can be adjusted during playback to

balance audio output.

Enjoying sound based on your

preference

Switching between surround playback,

stereo playback, and target playback modes

Press the STEREO key to switch to stereo

playback mode.

Press the SURROUND key to switch to

surround playback mode.

Press the TARGET key to switch to target

playback mode.

STEREO BM STEREO

Stereo (standard) Beam stereo

Playing back digitally compressed formats

(MP3, WMA, etc.) with enriched sound

(Compressed Music Enhancer)

Press the ENHANCER key to turn the

Compressed Music Enhancer function on.

Adjust volume for each channel

Press the CH LEVEL key to select

adjustable channel from the followings.

FL: Front left

FR: Front right

C: Center

SL: Surround left

SR: Surround right

SW: Subwoofer

Press the S/T key to adjust the volume.

Adjustable range: -20 to +20

When My Surround (MY SUR.) is selected (☞p. 37):

C: Center

SL/SR: Surround left and right

SW: Subwoofer

• By default, this function is set to “ON” when the input source is YIT

or USB (YSP-4300 only). It is set to “OFF” with any other input

source.

• Compressed Music Enhancer does not work in case of the following

digital audio signals:

– Dolby TrueHD, DTS-HD Master Audio, etc.

– Signal that sampling rate is more than 48 kHz.

Refer to “SPEAKER LEVEL” (☞p. 64) when adjusting the volume of

each channel with the test sound.

Example of volume balance

• If you have problems hearing words: Select C (center) to increase the

level.

When the sound is not like surround sound: Select SL (surround left)

and SR (surround right) to increase the level.

• The volume of the subwoofer also can be adjusted by using the

SUBWOOFER (+/-) key.

2) y

3) y

4) y

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha YSP-3300 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha YSP-3300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info