Bedienungsanleitung Yamaha ysp 4100 (Seite 32 von 54) (Englisch)

419747

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

32 En

Control range (from this unit): 1.8 m to 9.0 m (6.0 ft

to 30.0 ft)

Control range (from left wall): 0.6 m to 11.4 m (2.0 ft

to 38.0 ft)

■ BEAM ADJUSTMENT (Beam adjustment)

SET MENU → MANUAL SETUP → BEAM

ADJUSTMENT

Use to manually adjust the various sound beam settings.

Notes

• The “BEAM ADJUSTMENT” parameters are automatically

adjusted (except “Center” in “FOCAL LENGTH”) if you run

the AUTO SETUP (page 15) or if you configure “SETTING

PARAMETERS” (page 31).

• Depending on the beam mode settings (page 23), some channel

positions may not be available for selection. In this case, “– –”

is displayed.

1 Configure “HORIZONTAL ANGLE”.

Adjust the horizontal angle of sound beams for each

channel using test tones.

Adjust toward L (left) to move the direction of the

output to the left and adjust toward R (right) to move

it to the right.

Control range: L90° to R90°

• Press G to switch the channels.

2 Configure “VERTICAL ANGLE”.

Adjust the vertical angle of sound beams for each

channel using test tones.

Adjust toward – (minus) to move the angle downward

and adjust toward + (plus) to move the angle upward.

Control range: –45° to +45°

3 Configure “BEAM TRAVEL LENGTH”.

Adjust the distance that sound beams travel after

being output and reflected off the wall until they

arrive at the listening position so that all sounds can

arrive at the listening position at the same time.

Note

• Configure this setting only when you have adjusted

“HORIZONTAL ANGLE”.

Control range: 0.3 m to 24.0 m (1.0 ft to 80.0 ft)

4 Configure “FOCAL LENGTH”.

Adjust the distance from the front of this unit to the

focal point of output for each channel to achieve an

expansive feeling for each channel. Adjust toward -

(minus) to move the focus outward (widen the sweet

spot) and adjust toward + (plus) to move the focus

toward the normal position (narrow the sweet spot).

Control range: –1.0 m to +13.0 m (–3.5 ft to +43.5 ft)

• We recommend that you use the initial setting (–0.5 m or –

1.5 ft) for “Center”.

• The width of the sweet spot becomes slightly wider than

the width of this unit if you run the AUTO SETUP

(page 15) or if you configure “SETTING

PARAMETERS” (page 31).

■ IMAGE LOCATION (Image location)

SET MENU → MANUAL SETUP → IMAGE

LOCATION

Use to adjust the direction from which the front left and

right channel sound is heard so that each sound can be

heard closer to the center channel.

Use this feature to redirect audio signals if the sound

coming from the front left and right channels seems

unnatural.

1.8 to 9.0 m

(6.0 to 30.0 ft)

FLAT TO WALL

0.6 to 11.4 m

(2.0 to 38.0 ft)

(–)

(+)

(–)

(+)

(–)

0°

The length of each

arrow indicates the

beam travel length.

Focal

length

Focal

point

Sweet

spot

（−）

（＋）

Example

Front left channel Center channel

0 +10

ENT

7 8 9

4 5 6

1 2 3

HDMI 4 iPod FM

ENTER

SURROUND STEREO

OFF

ENTER

TAINMENT

MUSIC

CINEMA DSP

MOVIE

HDMI 1 HDMI 2 HDMI 3

TV AUX 1 AUX 2

TV AV

MENUTOP MENU

OPTION

MUTE

CODE SET

UNIVOLUME SUR. DECODE INTELLIBEAM

INPUT MUTE

TV VOL CH VOLUME

SETUP RETURN

MEMORY

SLEEPINFO

TUNING PRESET

ENTER

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha ysp 4100 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha ysp 4100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info