Bedienungsanleitung Yamaha ysp 4100 (Seite 33 von 54) (Englisch)

419747

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

33 En

PREPARATIONINTRODUCTION APPENDIXPLAYBACK FEATURES SETTINGS

Customizing this unit

(SET MENU)

System

configurations

(ADVANCED SETUP)

Using an external

amplifier

Controlling external

components

You can adjust this parameter only when “5Beam Plus2”,

“5 Beam” or “3 Beam” is selected in “BEAM MODE”

(page 23).

• To adjust the volume of each channel, see “CHANNEL

LEVEL” (page 34)

Choices: OFF*, ON

• Select “ON” to configure the sound direction.

1 Adjust the image location for the front left

channel (LEFT).

The higher the percentage, the louder the output from

the center

2 Adjust the image location for the front right

channel (RIGHT).

The higher the percentage, the louder the output from

the center

■ TONE CONTROL (Tone control)

SET MENU → SOUND SET MENU → TONE

CONTROL

Use to adjust the tonal quality of sound beams.

TREBLE (Treble)

Use to adjust the high-frequency response.

Choices: –10.0 dB to +10.0 dB

Initial setting: 0.0 dB

BASS (Bass)

Use to adjust the low-frequency response.

Choices: –10.0 dB to +10.0 dB

Initial setting: 0.0 dB

■ SUBWOOFER SET (Subwoofer settings)

SET MENU → SOUND SET MENU →

SUBWOOFER SET

Use to configure the subwoofer settings.

BASS OUT (Bass out)

Select where to output low-frequency effect (LFE) and

low-frequency (bass) signals.

Choices: SUBWOOFER, FRONT OR AUTO*

• Select SUBWOOFER if you connect a subwoofer with

a subwoofer cable. LFE and low-frequency signals

from other channels are directed to the subwoofer.

• Select FRONT OR AUTO if you do not use a

subwoofer or connect a subwoofer by wireless. LFE

and low-frequency signals from other channels are

directed to the front right and left channels when you

do not use a subwoofer. They are directed to the

subwoofer automatically when a wireless connection

between a subwoofer and this unit is established

properly. If the wireless connection is cut off, they are

directed to the front channels automatically.

CROSS OVER (Crossover)

When “BASS OUT” is set to “SUBWOOFER”, you can

use this feature to select a crossover (cutoff) frequency for

all low-frequency signals. All frequencies below the

selected frequency will be sent to the subwoofer position.

Choices: 80Hz, 100Hz, 120Hz*

LFE LEVEL (Low-frequency effect level)

Adjust the output level of the low-frequency effect (LFE)

channel according to the capacity of your subwoofer. This

setting is effective only when this unit decodes Dolby

Digital or DTS signals.

Choices: –20 dB to 0 dB*

DISTANCE (Distance)

Adjust the distance of the subwoofer from the listening

position.

Choices: 0.3 m to 15.0 m (1.0 ft to 50.0 ft)

Initial setting: 3.0 m (10.0 ft)

■ AUDIO DELAY (Audio delay)

SET MENU → SOUND SET MENU → AUDIO

DELAY

Use to adjust delay in output timing between video signals

and audio signals.

AUTO LIP SYNC (Automatic lipsync)

Select whether to automatically adjust the audio output

delay when a TV that supports the automatic lipsync is

connected to the HDMI OUT jack of this unit.

Choices: ON*, OFF

• Select ON if the TV connected to the HDMI OUT jack

of this unit supports the automatic lipsync. The audio

output delay is automatically adjusted.

• Select OFF if the TV connected to the HDMI OUT

jack of this unit does not support the automatic lipsync

or you want to disable the automatic lipsync. You can

manually adjust the audio output delay in “HDMI”.

Adjust the audio output delay applied to signals input

from the TV jacks.

Control range: 0 msec* to 400 msec

HDMI

Manually adjust the audio output delay applied to signals

input from the HDMI IN jacks. This setting is effective

only when “AUTO LIP SYNC” is set to “OFF”

Control range: 0 msec to 400 msec

Initial setting: 30msec

AUX1/2

Adjust the audio output delay applied to signals input

from the AUX1/2 jacks.

Control range: 0 msec to 400 msec

Initial setting: 30msec

SOUND SET MENU

Without adjustment

With the front left

channel adjusted

Without adjustment

With the front right

channel adjusted

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha ysp 4100 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha ysp 4100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info